am243x/am64x: pruio: add pwm driver
-add pwm driver Fixes: PINDSW-7096 Signed-off-by: Manoj Koppolu <manoj_koppolu@ti.com>
This commit is contained in:
Manoj Koppolu
parent
9998f7deb4
commit
ff5c4f5fae
@ -6,6 +6,7 @@ const component_file_list = [
|
|||||||
"source/position_sense/hdsl/.project/project.js",
|
"source/position_sense/hdsl/.project/project.js",
|
||||||
"source/position_sense/tamagawa/.project/project.js",
|
"source/position_sense/tamagawa/.project/project.js",
|
||||||
"source/position_sense/bissc/.project/project.js",
|
"source/position_sense/bissc/.project/project.js",
|
||||||
|
"source/pruicss_pwm/.project/project.js"
|
||||||
];
|
];
|
||||||
|
|
||||||
const device_defines = {
|
const device_defines = {
|
||||||
|
|||||||
@ -5,6 +5,7 @@ const component_file_list = [
|
|||||||
"source/position_sense/endat/.project/project.js",
|
"source/position_sense/endat/.project/project.js",
|
||||||
"source/position_sense/hdsl/.project/project.js",
|
"source/position_sense/hdsl/.project/project.js",
|
||||||
"source/position_sense/tamagawa/.project/project.js",
|
"source/position_sense/tamagawa/.project/project.js",
|
||||||
|
"source/pruicss_pwm/.project/project.js"
|
||||||
];
|
];
|
||||||
|
|
||||||
const device_defines = {
|
const device_defines = {
|
||||||
|
|||||||
@ -22,3 +22,4 @@ INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/bissc/include/bissc_drv.
|
|||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/bissc/include/bissc_interface.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/bissc/include/bissc_interface.h
|
||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_api.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_api.h
|
||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_drv.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_drv.h
|
||||||
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/pruicss_pwm/include/pruicss_pwm.h
|
||||||
|
|||||||
@ -17,3 +17,4 @@ INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/hdsl/include/hdsl_drv.h
|
|||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/tamagawa/include/tamagawa_drv.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/position_sense/tamagawa/include/tamagawa_drv.h
|
||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_api.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_api.h
|
||||||
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_drv.h
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/current_sense/sdfm/include/sdfm_drv.h
|
||||||
|
INPUT+= $(MOTOR_CONTROL_SDK_PATH)/source/pruicss_pwm/include/pruicss_pwm.h
|
||||||
|
|||||||
@ -37,6 +37,7 @@ help:
|
|||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_hdsl_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_hdsl_r5f.ti-arm-clang
|
||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_tamagawa_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_tamagawa_r5f.ti-arm-clang
|
||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_bissc_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_bissc_r5f.ti-arm-clang
|
||||||
|
@echo $(MAKE) -s -f makefile.am243x pruicss_pwm_r5f.ti-arm-clang
|
||||||
@echo .
|
@echo .
|
||||||
@echo Library clean targets,
|
@echo Library clean targets,
|
||||||
@echo ======================
|
@echo ======================
|
||||||
@ -45,6 +46,7 @@ help:
|
|||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
||||||
@echo $(MAKE) -s -f makefile.am243x motorcontrol_bissc_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am243x motorcontrol_bissc_r5f.ti-arm-clang_clean
|
||||||
|
@echo $(MAKE) -s -f makefile.am243x pruicss_pwm_r5f.ti-arm-clang_clean
|
||||||
@echo .
|
@echo .
|
||||||
@echo Example build targets,
|
@echo Example build targets,
|
||||||
@echo ======================
|
@echo ======================
|
||||||
@ -101,10 +103,17 @@ BUILD_COMBO_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang
|
|||||||
BUILD_COMBO_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang
|
||||||
BUILD_COMBO_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang
|
||||||
BUILD_COMBO_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang
|
||||||
|
<<<<<<< HEAD
|
||||||
BUILD_COMBO_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang
|
||||||
|
|
||||||
# Combine all Components
|
# Combine all Components
|
||||||
BUILD_COMBO_ALL = $(BUILD_COMBO_motorcontrol_sdfm) $(BUILD_COMBO_motorcontrol_endat) $(BUILD_COMBO_motorcontrol_hdsl) $(BUILD_COMBO_motorcontrol_tamagawa) $(BUILD_COMBO_motorcontrol_bissc)
|
BUILD_COMBO_ALL = $(BUILD_COMBO_motorcontrol_sdfm) $(BUILD_COMBO_motorcontrol_endat) $(BUILD_COMBO_motorcontrol_hdsl) $(BUILD_COMBO_motorcontrol_tamagawa) $(BUILD_COMBO_motorcontrol_bissc)
|
||||||
|
=======
|
||||||
|
BUILD_COMBO_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang
|
||||||
|
|
||||||
|
# Combine all Components
|
||||||
|
BUILD_COMBO_ALL = $(BUILD_COMBO_motorcontrol_sdfm) $(BUILD_COMBO_motorcontrol_endat) $(BUILD_COMBO_motorcontrol_hdsl) $(BUILD_COMBO_motorcontrol_tamagawa) $(BUILD_COMBO_pruicss_pwm)
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
# Combine all Pre-built Components
|
# Combine all Pre-built Components
|
||||||
BUILD_COMBO_PREBUILT_ALL =
|
BUILD_COMBO_PREBUILT_ALL =
|
||||||
@ -130,8 +139,13 @@ $(BUILD_COMBO_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_motorcontrol_tamagawa):
|
$(BUILD_COMBO_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$@) all
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$@) all
|
||||||
|
|
||||||
|
<<<<<<< HEAD
|
||||||
$(BUILD_COMBO_motorcontrol_bissc):
|
$(BUILD_COMBO_motorcontrol_bissc):
|
||||||
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$@) all
|
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$@) all
|
||||||
|
=======
|
||||||
|
$(BUILD_COMBO_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am243x.$(subst pruicss_pwm_,,$@) all
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
|
|
||||||
# Various Component Clean Targets
|
# Various Component Clean Targets
|
||||||
@ -139,10 +153,17 @@ BUILD_COMBO_CLEAN_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_clean
|
|||||||
BUILD_COMBO_CLEAN_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_clean
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
||||||
|
<<<<<<< HEAD
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang_clean
|
||||||
|
|
||||||
# Combine all Components Clean
|
# Combine all Components Clean
|
||||||
BUILD_COMBO_CLEAN_ALL = $(BUILD_COMBO_CLEAN_motorcontrol_sdfm) $(BUILD_COMBO_CLEAN_motorcontrol_endat) $(BUILD_COMBO_CLEAN_motorcontrol_hdsl) $(BUILD_COMBO_CLEAN_motorcontrol_tamagawa) $(BUILD_COMBO_CLEAN_motorcontrol_bissc)
|
BUILD_COMBO_CLEAN_ALL = $(BUILD_COMBO_CLEAN_motorcontrol_sdfm) $(BUILD_COMBO_CLEAN_motorcontrol_endat) $(BUILD_COMBO_CLEAN_motorcontrol_hdsl) $(BUILD_COMBO_CLEAN_motorcontrol_tamagawa) $(BUILD_COMBO_CLEAN_motorcontrol_bissc)
|
||||||
|
=======
|
||||||
|
BUILD_COMBO_CLEAN_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang_clean
|
||||||
|
|
||||||
|
# Combine all Components Clean
|
||||||
|
BUILD_COMBO_CLEAN_ALL = $(BUILD_COMBO_CLEAN_motorcontrol_sdfm) $(BUILD_COMBO_CLEAN_motorcontrol_endat) $(BUILD_COMBO_CLEAN_motorcontrol_hdsl) $(BUILD_COMBO_CLEAN_motorcontrol_tamagawa) $(BUILD_COMBO_CLEAN_pruicss_pwm)
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
# Combine all Pre-built Components Clean
|
# Combine all Pre-built Components Clean
|
||||||
BUILD_COMBO_PREBUILT_CLEAN_ALL =
|
BUILD_COMBO_PREBUILT_CLEAN_ALL =
|
||||||
@ -163,8 +184,13 @@ $(BUILD_COMBO_CLEAN_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_CLEAN_motorcontrol_tamagawa):
|
$(BUILD_COMBO_CLEAN_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$(subst _clean,,$@)) clean
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$(subst _clean,,$@)) clean
|
||||||
|
|
||||||
|
<<<<<<< HEAD
|
||||||
$(BUILD_COMBO_CLEAN_motorcontrol_bissc):
|
$(BUILD_COMBO_CLEAN_motorcontrol_bissc):
|
||||||
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$(subst _clean,,$@)) clean
|
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$(subst _clean,,$@)) clean
|
||||||
|
=======
|
||||||
|
$(BUILD_COMBO_CLEAN_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am243x.$(subst pruicss_pwm_,,$(subst _clean,,$@)) clean
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
|
|
||||||
# Various Component Scrub Targets
|
# Various Component Scrub Targets
|
||||||
@ -172,10 +198,17 @@ BUILD_COMBO_SCRUB_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_scrub_s
|
|||||||
BUILD_COMBO_SCRUB_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_scrub_scrub
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_scrub_scrub
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_scrub_scrub
|
||||||
|
<<<<<<< HEAD
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_bissc = motorcontrol_bissc_r5f.ti-arm-clang_scrub_scrub
|
||||||
|
|
||||||
# Combine all Components Scrub Targets
|
# Combine all Components Scrub Targets
|
||||||
BUILD_COMBO_SCRUB_ALL = $(BUILD_COMBO_SCRUB_motorcontrol_sdfm) $(BUILD_COMBO_SCRUB_motorcontrol_endat) $(BUILD_COMBO_SCRUB_motorcontrol_hdsl) $(BUILD_COMBO_SCRUB_motorcontrol_tamagawa) $(BUILD_COMBO_SCRUB_motorcontrol_bissc)
|
BUILD_COMBO_SCRUB_ALL = $(BUILD_COMBO_SCRUB_motorcontrol_sdfm) $(BUILD_COMBO_SCRUB_motorcontrol_endat) $(BUILD_COMBO_SCRUB_motorcontrol_hdsl) $(BUILD_COMBO_SCRUB_motorcontrol_tamagawa) $(BUILD_COMBO_SCRUB_motorcontrol_bissc)
|
||||||
|
=======
|
||||||
|
BUILD_COMBO_SCRUB_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang_scrub_scrub
|
||||||
|
|
||||||
|
# Combine all Components Scrub Targets
|
||||||
|
BUILD_COMBO_SCRUB_ALL = $(BUILD_COMBO_SCRUB_motorcontrol_sdfm) $(BUILD_COMBO_SCRUB_motorcontrol_endat) $(BUILD_COMBO_SCRUB_motorcontrol_hdsl) $(BUILD_COMBO_SCRUB_motorcontrol_tamagawa) $(BUILD_COMBO_SCRUB_pruicss_pwm)
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
# Combine all Pre-built Components Scrub Targets
|
# Combine all Pre-built Components Scrub Targets
|
||||||
BUILD_COMBO_PREBUILT_SCRUB_ALL =
|
BUILD_COMBO_PREBUILT_SCRUB_ALL =
|
||||||
@ -196,8 +229,13 @@ $(BUILD_COMBO_SCRUB_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_SCRUB_motorcontrol_tamagawa):
|
$(BUILD_COMBO_SCRUB_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$(subst _scrub,,$@)) scrub
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am243x.$(subst motorcontrol_tamagawa_,,$(subst _scrub,,$@)) scrub
|
||||||
|
|
||||||
|
<<<<<<< HEAD
|
||||||
$(BUILD_COMBO_SCRUB_motorcontrol_bissc):
|
$(BUILD_COMBO_SCRUB_motorcontrol_bissc):
|
||||||
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$(subst _scrub,,$@)) scrub
|
$(MAKE) -C source/position_sense/bissc -f makefile.am243x.$(subst motorcontrol_bissc_,,$(subst _scrub,,$@)) scrub
|
||||||
|
=======
|
||||||
|
$(BUILD_COMBO_SCRUB_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am243x.$(subst pruicss_pwm_,,$(subst _scrub,,$@)) scrub
|
||||||
|
>>>>>>> db822bd (am243x/am64x: pruio: add pwm driver)
|
||||||
|
|
||||||
|
|
||||||
BUILD_COMBO_EXAMPLE_ALL =
|
BUILD_COMBO_EXAMPLE_ALL =
|
||||||
|
|||||||
@ -36,6 +36,7 @@ help:
|
|||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_endat_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_endat_r5f.ti-arm-clang
|
||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_hdsl_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_hdsl_r5f.ti-arm-clang
|
||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_tamagawa_r5f.ti-arm-clang
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_tamagawa_r5f.ti-arm-clang
|
||||||
|
@echo $(MAKE) -s -f makefile.am64x pruicss_pwm_r5f.ti-arm-clang
|
||||||
@echo .
|
@echo .
|
||||||
@echo Library clean targets,
|
@echo Library clean targets,
|
||||||
@echo ======================
|
@echo ======================
|
||||||
@ -43,6 +44,7 @@ help:
|
|||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_endat_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_endat_r5f.ti-arm-clang_clean
|
||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
||||||
@echo $(MAKE) -s -f makefile.am64x motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
@echo $(MAKE) -s -f makefile.am64x motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
||||||
|
@echo $(MAKE) -s -f makefile.am64x pruicss_pwm_r5f.ti-arm-clang_clean
|
||||||
@echo .
|
@echo .
|
||||||
@echo Example build targets,
|
@echo Example build targets,
|
||||||
@echo ======================
|
@echo ======================
|
||||||
@ -78,9 +80,10 @@ BUILD_COMBO_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang
|
|||||||
BUILD_COMBO_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang
|
||||||
BUILD_COMBO_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang
|
||||||
BUILD_COMBO_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang
|
BUILD_COMBO_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang
|
||||||
|
BUILD_COMBO_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang
|
||||||
|
|
||||||
# Combine all Components
|
# Combine all Components
|
||||||
BUILD_COMBO_ALL = $(BUILD_COMBO_motorcontrol_sdfm) $(BUILD_COMBO_motorcontrol_endat) $(BUILD_COMBO_motorcontrol_hdsl) $(BUILD_COMBO_motorcontrol_tamagawa)
|
BUILD_COMBO_ALL = $(BUILD_COMBO_motorcontrol_sdfm) $(BUILD_COMBO_motorcontrol_endat) $(BUILD_COMBO_motorcontrol_hdsl) $(BUILD_COMBO_motorcontrol_tamagawa) $(BUILD_COMBO_pruicss_pwm)
|
||||||
|
|
||||||
# Combine all Pre-built Components
|
# Combine all Pre-built Components
|
||||||
BUILD_COMBO_PREBUILT_ALL =
|
BUILD_COMBO_PREBUILT_ALL =
|
||||||
@ -106,15 +109,19 @@ $(BUILD_COMBO_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_motorcontrol_tamagawa):
|
$(BUILD_COMBO_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$@) all
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$@) all
|
||||||
|
|
||||||
|
$(BUILD_COMBO_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am64x.$(subst pruicss_pwm_,,$@) all
|
||||||
|
|
||||||
|
|
||||||
# Various Component Clean Targets
|
# Various Component Clean Targets
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_clean
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_clean
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_clean
|
||||||
BUILD_COMBO_CLEAN_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
BUILD_COMBO_CLEAN_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_clean
|
||||||
|
BUILD_COMBO_CLEAN_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang_clean
|
||||||
|
|
||||||
# Combine all Components Clean
|
# Combine all Components Clean
|
||||||
BUILD_COMBO_CLEAN_ALL = $(BUILD_COMBO_CLEAN_motorcontrol_sdfm) $(BUILD_COMBO_CLEAN_motorcontrol_endat) $(BUILD_COMBO_CLEAN_motorcontrol_hdsl) $(BUILD_COMBO_CLEAN_motorcontrol_tamagawa)
|
BUILD_COMBO_CLEAN_ALL = $(BUILD_COMBO_CLEAN_motorcontrol_sdfm) $(BUILD_COMBO_CLEAN_motorcontrol_endat) $(BUILD_COMBO_CLEAN_motorcontrol_hdsl) $(BUILD_COMBO_CLEAN_motorcontrol_tamagawa) $(BUILD_COMBO_CLEAN_pruicss_pwm)
|
||||||
|
|
||||||
# Combine all Pre-built Components Clean
|
# Combine all Pre-built Components Clean
|
||||||
BUILD_COMBO_PREBUILT_CLEAN_ALL =
|
BUILD_COMBO_PREBUILT_CLEAN_ALL =
|
||||||
@ -135,15 +142,19 @@ $(BUILD_COMBO_CLEAN_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_CLEAN_motorcontrol_tamagawa):
|
$(BUILD_COMBO_CLEAN_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$(subst _clean,,$@)) clean
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$(subst _clean,,$@)) clean
|
||||||
|
|
||||||
|
$(BUILD_COMBO_CLEAN_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am64x.$(subst pruicss_pwm_,,$(subst _clean,,$@)) clean
|
||||||
|
|
||||||
|
|
||||||
# Various Component Scrub Targets
|
# Various Component Scrub Targets
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_sdfm = motorcontrol_sdfm_r5f.ti-arm-clang_scrub_scrub
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_endat = motorcontrol_endat_r5f.ti-arm-clang_scrub_scrub
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_hdsl = motorcontrol_hdsl_r5f.ti-arm-clang_scrub_scrub
|
||||||
BUILD_COMBO_SCRUB_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_scrub_scrub
|
BUILD_COMBO_SCRUB_motorcontrol_tamagawa = motorcontrol_tamagawa_r5f.ti-arm-clang_scrub_scrub
|
||||||
|
BUILD_COMBO_SCRUB_pruicss_pwm = pruicss_pwm_r5f.ti-arm-clang_scrub_scrub
|
||||||
|
|
||||||
# Combine all Components Scrub Targets
|
# Combine all Components Scrub Targets
|
||||||
BUILD_COMBO_SCRUB_ALL = $(BUILD_COMBO_SCRUB_motorcontrol_sdfm) $(BUILD_COMBO_SCRUB_motorcontrol_endat) $(BUILD_COMBO_SCRUB_motorcontrol_hdsl) $(BUILD_COMBO_SCRUB_motorcontrol_tamagawa)
|
BUILD_COMBO_SCRUB_ALL = $(BUILD_COMBO_SCRUB_motorcontrol_sdfm) $(BUILD_COMBO_SCRUB_motorcontrol_endat) $(BUILD_COMBO_SCRUB_motorcontrol_hdsl) $(BUILD_COMBO_SCRUB_motorcontrol_tamagawa) $(BUILD_COMBO_SCRUB_pruicss_pwm)
|
||||||
|
|
||||||
# Combine all Pre-built Components Scrub Targets
|
# Combine all Pre-built Components Scrub Targets
|
||||||
BUILD_COMBO_PREBUILT_SCRUB_ALL =
|
BUILD_COMBO_PREBUILT_SCRUB_ALL =
|
||||||
@ -164,6 +175,9 @@ $(BUILD_COMBO_SCRUB_motorcontrol_hdsl):
|
|||||||
$(BUILD_COMBO_SCRUB_motorcontrol_tamagawa):
|
$(BUILD_COMBO_SCRUB_motorcontrol_tamagawa):
|
||||||
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$(subst _scrub,,$@)) scrub
|
$(MAKE) -C source/position_sense/tamagawa -f makefile.am64x.$(subst motorcontrol_tamagawa_,,$(subst _scrub,,$@)) scrub
|
||||||
|
|
||||||
|
$(BUILD_COMBO_SCRUB_pruicss_pwm):
|
||||||
|
$(MAKE) -C source/pruicss_pwm -f makefile.am64x.$(subst pruicss_pwm_,,$(subst _scrub,,$@)) scrub
|
||||||
|
|
||||||
|
|
||||||
BUILD_COMBO_EXAMPLE_ALL =
|
BUILD_COMBO_EXAMPLE_ALL =
|
||||||
# Various Example Targets
|
# Various Example Targets
|
||||||
|
|||||||
14
source/pruicss_pwm/.project/project.js
Normal file
14
source/pruicss_pwm/.project/project.js
Normal file
@ -0,0 +1,14 @@
|
|||||||
|
function getComponentProperty(device)
|
||||||
|
{
|
||||||
|
return require(`./project_${device}`).getComponentProperty();
|
||||||
|
};
|
||||||
|
|
||||||
|
function getComponentBuildProperty(buildOption)
|
||||||
|
{
|
||||||
|
return require(`./project_${buildOption.device}`).getComponentBuildProperty(buildOption);
|
||||||
|
};
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
getComponentProperty,
|
||||||
|
getComponentBuildProperty,
|
||||||
|
};
|
||||||
52
source/pruicss_pwm/.project/project_am243x.js
Normal file
52
source/pruicss_pwm/.project/project_am243x.js
Normal file
@ -0,0 +1,52 @@
|
|||||||
|
let path = require('path');
|
||||||
|
|
||||||
|
let device = "am243x";
|
||||||
|
|
||||||
|
const files = {
|
||||||
|
common: [
|
||||||
|
"pruicss_pwm.c",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const filedirs = {
|
||||||
|
common: [
|
||||||
|
"${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/driver",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const includes = {
|
||||||
|
common: [
|
||||||
|
"${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/include",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const buildOptionCombos = [
|
||||||
|
{ device: device, cpu: "r5f", cgt: "ti-arm-clang"},
|
||||||
|
];
|
||||||
|
|
||||||
|
function getComponentProperty() {
|
||||||
|
let property = {};
|
||||||
|
|
||||||
|
property.dirPath = path.resolve(__dirname, "..");
|
||||||
|
property.type = "library";
|
||||||
|
property.name = "pruicss_pwm";
|
||||||
|
property.isInternal = false;
|
||||||
|
property.buildOptionCombos = buildOptionCombos;
|
||||||
|
|
||||||
|
return property;
|
||||||
|
}
|
||||||
|
|
||||||
|
function getComponentBuildProperty(buildOption) {
|
||||||
|
let build_property = {};
|
||||||
|
|
||||||
|
build_property.files = files;
|
||||||
|
build_property.filedirs = filedirs;
|
||||||
|
build_property.includes = includes;
|
||||||
|
|
||||||
|
return build_property;
|
||||||
|
}
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
getComponentProperty,
|
||||||
|
getComponentBuildProperty,
|
||||||
|
};
|
||||||
52
source/pruicss_pwm/.project/project_am64x.js
Normal file
52
source/pruicss_pwm/.project/project_am64x.js
Normal file
@ -0,0 +1,52 @@
|
|||||||
|
let path = require('path');
|
||||||
|
|
||||||
|
let device = "am64x";
|
||||||
|
|
||||||
|
const files = {
|
||||||
|
common: [
|
||||||
|
"pruicss_pwm.c",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const filedirs = {
|
||||||
|
common: [
|
||||||
|
"${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/driver",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const includes = {
|
||||||
|
common: [
|
||||||
|
"${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/include",
|
||||||
|
],
|
||||||
|
};
|
||||||
|
|
||||||
|
const buildOptionCombos = [
|
||||||
|
{ device: device, cpu: "r5f", cgt: "ti-arm-clang"},
|
||||||
|
];
|
||||||
|
|
||||||
|
function getComponentProperty() {
|
||||||
|
let property = {};
|
||||||
|
|
||||||
|
property.dirPath = path.resolve(__dirname, "..");
|
||||||
|
property.type = "library";
|
||||||
|
property.name = "pruicss_pwm";
|
||||||
|
property.isInternal = false;
|
||||||
|
property.buildOptionCombos = buildOptionCombos;
|
||||||
|
|
||||||
|
return property;
|
||||||
|
}
|
||||||
|
|
||||||
|
function getComponentBuildProperty(buildOption) {
|
||||||
|
let build_property = {};
|
||||||
|
|
||||||
|
build_property.files = files;
|
||||||
|
build_property.filedirs = filedirs;
|
||||||
|
build_property.includes = includes;
|
||||||
|
|
||||||
|
return build_property;
|
||||||
|
}
|
||||||
|
|
||||||
|
module.exports = {
|
||||||
|
getComponentProperty,
|
||||||
|
getComponentBuildProperty,
|
||||||
|
};
|
||||||
1354
source/pruicss_pwm/driver/pruicss_pwm.c
Normal file
1354
source/pruicss_pwm/driver/pruicss_pwm.c
Normal file
File diff suppressed because it is too large
Load Diff
389
source/pruicss_pwm/include/pruicss_pwm.h
Normal file
389
source/pruicss_pwm/include/pruicss_pwm.h
Normal file
@ -0,0 +1,389 @@
|
|||||||
|
/*
|
||||||
|
* Copyright (C) 2023 Texas Instruments Incorporated
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
*
|
||||||
|
* Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
*
|
||||||
|
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||||
|
* its contributors may be used to endorse or promote products derived
|
||||||
|
* from this software without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||||
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||||
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||||
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||||
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||||
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||||
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \defgroup PRUICSS_PWM_API APIs for PruIcss_pwm
|
||||||
|
*
|
||||||
|
* This module contains APIs for device driver pruicss_pwm supported in this SDK.
|
||||||
|
*
|
||||||
|
* PRUICSS has one pwm module, which has four pwm sets (PWM0, PWM1, PWM2, PWM3)
|
||||||
|
* Each Set has six signals (A0,A1,A2,B0,B1,B2)
|
||||||
|
* Each Set one trip zone output OR logic block, which has nine trip signals
|
||||||
|
* (trip_e1_[0:2], trip_e2, trip_e3[0:2], trip_e4, trip_e5) as input
|
||||||
|
*
|
||||||
|
* With Reference to Technical Reference Manual, Pwm six signals(A0,A1,A2,B0,B1,B2) Naming convention is slightly different
|
||||||
|
*
|
||||||
|
* PWMn==============>PWMn_0=========>PWMn_0_POS (alias signal A0)
|
||||||
|
* | |=====>PWMn_0_NEG (alias signal A1)
|
||||||
|
* |
|
||||||
|
* |
|
||||||
|
* |
|
||||||
|
* |=========>PWMn_1=========>PWMn_1_POS (alias signal A2)
|
||||||
|
* | |=====>PWMn_1_NEG (alias signal B0)
|
||||||
|
* |
|
||||||
|
* |
|
||||||
|
* |
|
||||||
|
* |=========>PWMn_2=========>PWMn_2_POS (alias signal B1)
|
||||||
|
* |=====>PWMn_2_NEG (alias signal B2)
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* ========================================================================== */
|
||||||
|
/* Include Files */
|
||||||
|
/* ========================================================================== */
|
||||||
|
|
||||||
|
#ifndef PRUICSS_PWM_H_
|
||||||
|
#define PRUICSS_PWM_H_
|
||||||
|
|
||||||
|
#include <stddef.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <drivers/pruicss.h>
|
||||||
|
#include <drivers/hw_include/cslr.h>
|
||||||
|
#include <drivers/hw_include/hw_types.h>
|
||||||
|
|
||||||
|
/* ========================================================================== */
|
||||||
|
/* Macros & Typedefs */
|
||||||
|
/* ========================================================================== */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief Return status when the API execution was successful
|
||||||
|
*/
|
||||||
|
#define SystemP_SUCCESS ((int32_t )0)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief Return status when the API execution was not successful due to a failure.
|
||||||
|
*/
|
||||||
|
#define SystemP_FAILURE ((int32_t)-1)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* ========================================================================== */
|
||||||
|
/* Function Declarations */
|
||||||
|
/* ========================================================================== */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API writes Lower_32bitValue of IEP counter in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value iep count register Lower 32bit Value
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setIepCounterLower_32bitValue(PRUICSS_Handle handle, uint8_t iepInstance, uint32_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API writes Upper_32bitValue of IEP counter in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value iep count register Upper 32bit Value
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setIepCounterUpper_32bitValue(PRUICSS_Handle handle, uint8_t iepInstance, uint32_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API sets enables/disables of IEP counter reset on compare 0 event in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value Value to store in compare enable field of compare config register
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_configureIepCmp0ResetEnable(PRUICSS_Handle handle, uint8_t iepInstance, uint8_t enable);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API sets enables/disables compare events in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value Value to store in compare enable field of compare config register
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_configureIepCompareEnable(PRUICSS_Handle handle, uint8_t iepInstance, uint16_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API writes Lower_32bitValue of compare event in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value compare register Lower 32bit Value
|
||||||
|
* \param cmpEvent compare Event number. Maximum value allowed is 15
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setIepCompareEventLower_32bitValue(PRUICSS_Handle handle, uint8_t iepInstance, uint8_t cmpEvent, uint32_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API writes Upper_32bitValue of compare event in IEP module.
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param iepInstance 0 for IEP0, 1 for IEP1
|
||||||
|
* \param value compare register Upper 32bit Value
|
||||||
|
* \param cmpEvent compare Event number. Maximum value allowed is 15
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setIepCompareEventUpper_32bitValue(PRUICSS_Handle handle, uint8_t iepInstance, uint8_t cmpEvent, uint32_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates Debounce Value for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param value pwmSet Debounce Value
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setPwmDebouceValue(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t value);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates TripMask Value for specified pwm set
|
||||||
|
*
|
||||||
|
* \brief Software TripMask
|
||||||
|
* \brief 0x0: PWM0_POS_ERR_TRIP (trip_e5)
|
||||||
|
* \brief 0x1: PWM0_OVER_ERR_TRIP (trip_e4)
|
||||||
|
* \brief 0x2: PWM0_0_SD_SHORT_ERR_TRIP (trip_e3_0)
|
||||||
|
* \brief 0x3: PWM0_1_SD_SHORT_ERR_TRIP (trip_e3_1)
|
||||||
|
* \brief 0x4: PWM0_2_SD_SHORT_ERR_TRIP (trip_e3_2)
|
||||||
|
* \brief 0x5: PWM0_DEBOUNCE_TRIP_IN (trip_e2)
|
||||||
|
* \brief 0x6: PWM0_0_DEBOUNCE_TRIP (trip_e1_0)
|
||||||
|
* \brief 0x7: PWM0_1_DEBOUNCE_TRIP (trip_e1_1)
|
||||||
|
* \brief 0x8: PWM0_2_DEBOUNCE_TRIP (trip_e1_2)
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param maskvalue pwmSet maskValue
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_setPwmTripMask(PRUICSS_Handle handle, uint8_t pwmSet, uint16_t maskvalue);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API enables/disables TripReset on Compare_0 Event for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param value 0 for disable, 1 for enable
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_configurePwmCmp0TripResetEnable(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t enable);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API generates Software Trip Reset by writing 1 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_generatePwmTripReset(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API generates Software Over current error trip by writing 1 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_generatePwmOverCurrentErrorTrip(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API generates Software Position Feedback Error Trip by writing 1 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_generatePwmPositionFeedbackErrorTrip(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API clears Software Trip Reset by writing 0 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_clearPwmTripResetStatus(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API clears Software Over current error trip by writing 0 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_clearPwmOverCurrentErrorTrip(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API clears Software Position Feedback Error Trip by writing 0 to bit field for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_clearPwmPositionFeedbackErrorTrip(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API returns Trip trigger cause vector for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #Trip trigger cause vector on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_getPwmTripTriggerCauseVector(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API returns Trip status for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #Trip status on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_getPwmTripStatus(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API clears Trip status and makes state transition to Intial state as follows (Active->Intial)
|
||||||
|
* or (Trip->Intial) for specified pwm set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_clearPwmTripStatus(PRUICSS_Handle handle, uint8_t pwmSet);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of A0 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalA0(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of A1 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalA1(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of A2 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalA2(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of B0 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalB0(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of B1 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalB1(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API updates output action for specified state of B2 signal for specified PWM set
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param pwmSet 0 for PWM0, 1 for PWM1, 2 for PWM2, 3 for PWM3
|
||||||
|
* \param state 0 for Intial, 1 for Active, 2 for Safe(alias Trip) state
|
||||||
|
* \param action 0 for Toggle, 1 for Low, 2 for High
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICCS_actionOnOutputCfgPwmSignalB2(PRUICSS_Handle handle, uint8_t pwmSet, uint8_t state, uint8_t action);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \brief This API enables Efficiency mode
|
||||||
|
* In Efficiency mode Pwm state machine will go from Idle to
|
||||||
|
* Active and the same time Pwm output will get updated during this
|
||||||
|
* state transition And Iep Cmp flags will get auto HW cleared
|
||||||
|
*
|
||||||
|
* \param handle PRUICSS_Handle returned from PRUICSS_open()
|
||||||
|
* \param enable 0 for disable, 1 for enable
|
||||||
|
* \return #SystemP_SUCCESS on success, #SystemP_FAILURE on error
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int32_t PRUICSS_configurePwmEfficiencyModeEnable(PRUICSS_Handle handle, uint8_t enable);
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif/* #ifndef PRUICSS_PWM_H_ */
|
||||||
119
source/pruicss_pwm/makefile.am243x.r5f.ti-arm-clang
Normal file
119
source/pruicss_pwm/makefile.am243x.r5f.ti-arm-clang
Normal file
@ -0,0 +1,119 @@
|
|||||||
|
#
|
||||||
|
# Auto generated makefile
|
||||||
|
#
|
||||||
|
|
||||||
|
export MOTOR_CONTROL_SDK_PATH?=$(abspath ../..)
|
||||||
|
include $(MOTOR_CONTROL_SDK_PATH)/imports.mak
|
||||||
|
|
||||||
|
CG_TOOL_ROOT=$(CGT_TI_ARM_CLANG_PATH)
|
||||||
|
|
||||||
|
CC=$(CGT_TI_ARM_CLANG_PATH)/bin/tiarmclang
|
||||||
|
AR=$(CGT_TI_ARM_CLANG_PATH)/bin/tiarmar
|
||||||
|
|
||||||
|
PROFILE?=release
|
||||||
|
ConfigName:=$(PROFILE)
|
||||||
|
|
||||||
|
LIBNAME:=pruicss_pwm.am243x.r5f.ti-arm-clang.$(PROFILE).lib
|
||||||
|
|
||||||
|
FILES_common := \
|
||||||
|
pruicss_pwm.c \
|
||||||
|
|
||||||
|
FILES_PATH_common = \
|
||||||
|
${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/driver \
|
||||||
|
|
||||||
|
INCLUDES_common := \
|
||||||
|
-I${CG_TOOL_ROOT}/include/c \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/mcu_plus_sdk/source \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/source \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/include \
|
||||||
|
|
||||||
|
DEFINES_common := \
|
||||||
|
-DSOC_AM243X \
|
||||||
|
|
||||||
|
CFLAGS_common := \
|
||||||
|
-mcpu=cortex-r5 \
|
||||||
|
-mfloat-abi=hard \
|
||||||
|
-mfpu=vfpv3-d16 \
|
||||||
|
-mthumb \
|
||||||
|
-Wall \
|
||||||
|
-Werror \
|
||||||
|
-g \
|
||||||
|
-Wno-gnu-variable-sized-type-not-at-end \
|
||||||
|
-Wno-unused-function \
|
||||||
|
|
||||||
|
CFLAGS_cpp_common := \
|
||||||
|
-Wno-c99-designator \
|
||||||
|
-Wno-extern-c-compat \
|
||||||
|
-Wno-c++11-narrowing \
|
||||||
|
-Wno-reorder-init-list \
|
||||||
|
-Wno-deprecated-register \
|
||||||
|
-Wno-writable-strings \
|
||||||
|
-Wno-enum-compare \
|
||||||
|
-Wno-reserved-user-defined-literal \
|
||||||
|
-Wno-unused-const-variable \
|
||||||
|
-x c++ \
|
||||||
|
|
||||||
|
CFLAGS_debug := \
|
||||||
|
-D_DEBUG_=1 \
|
||||||
|
|
||||||
|
CFLAGS_release := \
|
||||||
|
-Os \
|
||||||
|
|
||||||
|
ARFLAGS_common := \
|
||||||
|
rc \
|
||||||
|
|
||||||
|
FILES := $(FILES_common) $(FILES_$(PROFILE))
|
||||||
|
ASMFILES := $(ASMFILES_common) $(ASMFILES_$(PROFILE))
|
||||||
|
FILES_PATH := $(FILES_PATH_common) $(FILES_PATH_$(PROFILE))
|
||||||
|
CFLAGS := $(CFLAGS_common) $(CFLAGS_$(PROFILE))
|
||||||
|
ASMFLAGS := $(CFLAGS_common) $(CFLAGS_$(PROFILE))
|
||||||
|
ifeq ($(CPLUSPLUS_BUILD), yes)
|
||||||
|
CFLAGS += $(CFLAGS_cpp_common)
|
||||||
|
endif
|
||||||
|
DEFINES := $(DEFINES_common) $(DEFINES_$(PROFILE))
|
||||||
|
INCLUDES := $(INCLUDES_common) $(INCLUDE_$(PROFILE))
|
||||||
|
ARFLAGS := $(ARFLAGS_common) $(ARFLAGS_$(PROFILE))
|
||||||
|
|
||||||
|
LIBDIR := lib
|
||||||
|
OBJDIR := obj/am243x/ti-arm-clang/$(PROFILE)/r5f/pruicss_pwm/
|
||||||
|
OBJS := $(FILES:%.c=%.obj)
|
||||||
|
OBJS += $(ASMFILES:%.S=%.obj)
|
||||||
|
DEPS := $(FILES:%.c=%.d)
|
||||||
|
|
||||||
|
vpath %.obj $(OBJDIR)
|
||||||
|
vpath %.c $(FILES_PATH)
|
||||||
|
vpath %.S $(FILES_PATH)
|
||||||
|
|
||||||
|
$(OBJDIR)/%.obj %.obj: %.c
|
||||||
|
@echo Compiling: $(LIBNAME): $<
|
||||||
|
$(CC) -c $(CFLAGS) $(INCLUDES) $(DEFINES) -MMD -o $(OBJDIR)/$@ $<
|
||||||
|
|
||||||
|
$(OBJDIR)/%.obj %.obj: %.S
|
||||||
|
@echo Compiling: $(LIBNAME): $<
|
||||||
|
$(CC) -c $(ASMFLAGS) -o $(OBJDIR)/$@ $<
|
||||||
|
|
||||||
|
all: $(LIBDIR)/$(LIBNAME)
|
||||||
|
|
||||||
|
$(LIBDIR)/$(LIBNAME): $(OBJS) | $(LIBDIR)
|
||||||
|
@echo .
|
||||||
|
@echo Archiving: $(LIBNAME) to $@ ...
|
||||||
|
$(AR) $(ARFLAGS) $@ $(addprefix $(OBJDIR), $(OBJS))
|
||||||
|
@echo Archiving: $(LIBNAME) Done !!!
|
||||||
|
@echo .
|
||||||
|
|
||||||
|
clean:
|
||||||
|
@echo Cleaning: $(LIBNAME) ...
|
||||||
|
$(RMDIR) $(OBJDIR)
|
||||||
|
$(RM) $(LIBDIR)/$(LIBNAME)
|
||||||
|
|
||||||
|
scrub:
|
||||||
|
@echo Scrubing: $(LIBNAME) ...
|
||||||
|
-$(RMDIR) obj/
|
||||||
|
-$(RMDIR) lib/
|
||||||
|
|
||||||
|
$(OBJS): | $(OBJDIR)
|
||||||
|
|
||||||
|
$(LIBDIR) $(OBJDIR):
|
||||||
|
$(MKDIR) $@
|
||||||
|
|
||||||
|
-include $(addprefix $(OBJDIR)/, $(DEPS))
|
||||||
119
source/pruicss_pwm/makefile.am64x.r5f.ti-arm-clang
Normal file
119
source/pruicss_pwm/makefile.am64x.r5f.ti-arm-clang
Normal file
@ -0,0 +1,119 @@
|
|||||||
|
#
|
||||||
|
# Auto generated makefile
|
||||||
|
#
|
||||||
|
|
||||||
|
export MOTOR_CONTROL_SDK_PATH?=$(abspath ../..)
|
||||||
|
include $(MOTOR_CONTROL_SDK_PATH)/imports.mak
|
||||||
|
|
||||||
|
CG_TOOL_ROOT=$(CGT_TI_ARM_CLANG_PATH)
|
||||||
|
|
||||||
|
CC=$(CGT_TI_ARM_CLANG_PATH)/bin/tiarmclang
|
||||||
|
AR=$(CGT_TI_ARM_CLANG_PATH)/bin/tiarmar
|
||||||
|
|
||||||
|
PROFILE?=release
|
||||||
|
ConfigName:=$(PROFILE)
|
||||||
|
|
||||||
|
LIBNAME:=pruicss_pwm.am64x.r5f.ti-arm-clang.$(PROFILE).lib
|
||||||
|
|
||||||
|
FILES_common := \
|
||||||
|
pruicss_pwm.c \
|
||||||
|
|
||||||
|
FILES_PATH_common = \
|
||||||
|
${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/driver \
|
||||||
|
|
||||||
|
INCLUDES_common := \
|
||||||
|
-I${CG_TOOL_ROOT}/include/c \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/mcu_plus_sdk/source \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/source \
|
||||||
|
-I${MOTOR_CONTROL_SDK_PATH}/source/pruicss_pwm/include \
|
||||||
|
|
||||||
|
DEFINES_common := \
|
||||||
|
-DSOC_AM64X \
|
||||||
|
|
||||||
|
CFLAGS_common := \
|
||||||
|
-mcpu=cortex-r5 \
|
||||||
|
-mfloat-abi=hard \
|
||||||
|
-mfpu=vfpv3-d16 \
|
||||||
|
-mthumb \
|
||||||
|
-Wall \
|
||||||
|
-Werror \
|
||||||
|
-g \
|
||||||
|
-Wno-gnu-variable-sized-type-not-at-end \
|
||||||
|
-Wno-unused-function \
|
||||||
|
|
||||||
|
CFLAGS_cpp_common := \
|
||||||
|
-Wno-c99-designator \
|
||||||
|
-Wno-extern-c-compat \
|
||||||
|
-Wno-c++11-narrowing \
|
||||||
|
-Wno-reorder-init-list \
|
||||||
|
-Wno-deprecated-register \
|
||||||
|
-Wno-writable-strings \
|
||||||
|
-Wno-enum-compare \
|
||||||
|
-Wno-reserved-user-defined-literal \
|
||||||
|
-Wno-unused-const-variable \
|
||||||
|
-x c++ \
|
||||||
|
|
||||||
|
CFLAGS_debug := \
|
||||||
|
-D_DEBUG_=1 \
|
||||||
|
|
||||||
|
CFLAGS_release := \
|
||||||
|
-Os \
|
||||||
|
|
||||||
|
ARFLAGS_common := \
|
||||||
|
rc \
|
||||||
|
|
||||||
|
FILES := $(FILES_common) $(FILES_$(PROFILE))
|
||||||
|
ASMFILES := $(ASMFILES_common) $(ASMFILES_$(PROFILE))
|
||||||
|
FILES_PATH := $(FILES_PATH_common) $(FILES_PATH_$(PROFILE))
|
||||||
|
CFLAGS := $(CFLAGS_common) $(CFLAGS_$(PROFILE))
|
||||||
|
ASMFLAGS := $(CFLAGS_common) $(CFLAGS_$(PROFILE))
|
||||||
|
ifeq ($(CPLUSPLUS_BUILD), yes)
|
||||||
|
CFLAGS += $(CFLAGS_cpp_common)
|
||||||
|
endif
|
||||||
|
DEFINES := $(DEFINES_common) $(DEFINES_$(PROFILE))
|
||||||
|
INCLUDES := $(INCLUDES_common) $(INCLUDE_$(PROFILE))
|
||||||
|
ARFLAGS := $(ARFLAGS_common) $(ARFLAGS_$(PROFILE))
|
||||||
|
|
||||||
|
LIBDIR := lib
|
||||||
|
OBJDIR := obj/am64x/ti-arm-clang/$(PROFILE)/r5f/pruicss_pwm/
|
||||||
|
OBJS := $(FILES:%.c=%.obj)
|
||||||
|
OBJS += $(ASMFILES:%.S=%.obj)
|
||||||
|
DEPS := $(FILES:%.c=%.d)
|
||||||
|
|
||||||
|
vpath %.obj $(OBJDIR)
|
||||||
|
vpath %.c $(FILES_PATH)
|
||||||
|
vpath %.S $(FILES_PATH)
|
||||||
|
|
||||||
|
$(OBJDIR)/%.obj %.obj: %.c
|
||||||
|
@echo Compiling: $(LIBNAME): $<
|
||||||
|
$(CC) -c $(CFLAGS) $(INCLUDES) $(DEFINES) -MMD -o $(OBJDIR)/$@ $<
|
||||||
|
|
||||||
|
$(OBJDIR)/%.obj %.obj: %.S
|
||||||
|
@echo Compiling: $(LIBNAME): $<
|
||||||
|
$(CC) -c $(ASMFLAGS) -o $(OBJDIR)/$@ $<
|
||||||
|
|
||||||
|
all: $(LIBDIR)/$(LIBNAME)
|
||||||
|
|
||||||
|
$(LIBDIR)/$(LIBNAME): $(OBJS) | $(LIBDIR)
|
||||||
|
@echo .
|
||||||
|
@echo Archiving: $(LIBNAME) to $@ ...
|
||||||
|
$(AR) $(ARFLAGS) $@ $(addprefix $(OBJDIR), $(OBJS))
|
||||||
|
@echo Archiving: $(LIBNAME) Done !!!
|
||||||
|
@echo .
|
||||||
|
|
||||||
|
clean:
|
||||||
|
@echo Cleaning: $(LIBNAME) ...
|
||||||
|
$(RMDIR) $(OBJDIR)
|
||||||
|
$(RM) $(LIBDIR)/$(LIBNAME)
|
||||||
|
|
||||||
|
scrub:
|
||||||
|
@echo Scrubing: $(LIBNAME) ...
|
||||||
|
-$(RMDIR) obj/
|
||||||
|
-$(RMDIR) lib/
|
||||||
|
|
||||||
|
$(OBJS): | $(OBJDIR)
|
||||||
|
|
||||||
|
$(LIBDIR) $(OBJDIR):
|
||||||
|
$(MKDIR) $@
|
||||||
|
|
||||||
|
-include $(addprefix $(OBJDIR)/, $(DEPS))
|
||||||
Loading…
Reference in New Issue
Block a user