- Add example and firmware projects for third channel
- Update diagnostic application changes to support 3rd channel
- Add overlay based firmware build for third channel
- Update sysconfig module for third channel
- Add driver APIs for configuring copy table and channel mask
- Add IPC among cores when overlay based loading is needed for
third channel
- Add logic to reset all channels when one channel is reset
Fixes: PINDSW-7051
Signed-off-by: Rajul Bhambay <r-bhambay@ti.com>
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Also update the HDSL_write_pc_buffer API
- Update the SDK example to use updated APIs
- Set bit 7 in PC_ADD_H and PC_OFF_H in firmware for long messages
Fixes: PINDSW-7032
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Remove increment by 1 after CRC check success on safe channel 2 data
- For CRC check failure, decrement by 8
Fixes: PINDSW-6944
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- TEMP_REG1 was being used by QM_ADD and ONLINE STATUS update in
v-frame processing
- Update version to 0.4
Fixes: PINDSW-6487
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Mask was not applied to QM register before checking the low value
- Enable QMLW/POS checks for all H-frames
Fixes: PINDSW-6530
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Firmware should not clear these bits in EVENT/EVENT_S registers
- Update the version to 0.3
Fixes: PINDSW-6526
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- MASK_SUM should not be used for masking SUMMARY while updating these
SUM and SSUM bits in ONLINE STATUS registers
- Fix the mask for SCE and VPOS updates
Fixes: PINDSW-6487, PINDSW-6488
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Fix sign extension in estimator for relative position and acceleration
addition
- Fix sign estimation for relative position calculation
- Remove an unnecessary RET instruction
- Fix register corruption for ALIGN_PH
- Fix register usage for DTE error signaling
Fixes: PINDSW-5689
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
- Fix the address of ONLINE STATUS bytes by adding a reserved byte
- Create separate entries for low and high bytes of ONLINE STATUS registers
- Add SAFE_CTRL and POSTX registers
- Use high and low addresses in firmware for ONLINE STATUS registers
Fixes: PINDSW-6489
Signed-off-by: Dhaval Khandla <dhavaljk@ti.com>
