432 lines
16 KiB
C
432 lines
16 KiB
C
|
//###########################################################################
|
||
|
|
//
|
||
|
|
// FILE: cpu1bootrom.h
|
||
|
|
//
|
||
|
|
// TITLE: BootROM Definitions.
|
||
|
|
//
|
||
|
|
//###########################################################################
|
||
|
|
// $TI Release: F280013x Support Library v4.03.00.00 $
|
||
|
|
// $Release Date: 02-02-2023 $
|
||
|
|
// $Copyright:
|
||
|
|
// Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.co/
|
||
|
|
//
|
||
|
|
// Redistribution and use in source and binary forms, with or without
|
||
|
|
// modification, are permitted provided that the following conditions
|
||
|
|
// are met:
|
||
|
|
//
|
||
|
|
// Redistributions of source code must retain the above copyright
|
||
|
|
// notice, this list of conditions and the following disclaimer.
|
||
|
|
//
|
||
|
|
// Redistributions in binary form must reproduce the above copyright
|
||
|
|
// notice, this list of conditions and the following disclaimer in the
|
||
|
|
// documentation and/or other materials provided with the
|
||
|
|
// distribution.
|
||
|
|
//
|
||
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
||
|
|
// its contributors may be used to endorse or promote products derived
|
||
|
|
// from this software without specific prior written permission.
|
||
|
|
//
|
||
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
// $
|
||
|
|
//###########################################################################
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
#ifndef C_BOOTROM_H_
|
||
|
|
#define C_BOOTROM_H_
|
||
|
|
|
||
|
|
#include <stdint.h>
|
||
|
|
#include "hw_types.h"
|
||
|
|
#include "hw_memmap.h"
|
||
|
|
#include "sysctl.h"
|
||
|
|
#include "cpu.h"
|
||
|
|
//#include "flash.h"
|
||
|
|
//#include "hw_flash_command.h"
|
||
|
|
#include "hw_dcsm.h"
|
||
|
|
#include "pin_map.h"
|
||
|
|
#include "gpio.h"
|
||
|
|
#include "spi.h"
|
||
|
|
#include "dcc.h"
|
||
|
|
//#include "cpu1brom_boot_modes.h"
|
||
|
|
//#include "cpu1brom_escape_point_table.h"
|
||
|
|
//#include "cpu1brom_pbist.h"
|
||
|
|
//#include "hw_memcfg.h"
|
||
|
|
//#include "cpu1brom_trims.h"
|
||
|
|
//#include "bootloader_can.h"
|
||
|
|
//#include "bootloader_i2c.h"
|
||
|
|
//#include "bootloader_parallel.h"
|
||
|
|
//#include "bootloader_sci.h"
|
||
|
|
//#include "bootloader_spi.h"
|
||
|
|
|
||
|
|
//
|
||
|
|
//Start Address of Boot ROM
|
||
|
|
//
|
||
|
|
#define ROM_START_ADDRESS 0x3F9800UL
|
||
|
|
|
||
|
|
//
|
||
|
|
//Length of ROM in KB
|
||
|
|
//
|
||
|
|
#define ROM_REGION_LENGTH 64UL
|
||
|
|
|
||
|
|
#define RAM_LSX_NOT_DONE 0x0U
|
||
|
|
#define BROM_PLL_CONFIG_ERROR 0xFFFFU
|
||
|
|
#define BROM_PLL_CONFIG_SUCCESS 0x0U
|
||
|
|
|
||
|
|
#define EFUSE_SINGLE_BIT_ERROR (0x15UL)
|
||
|
|
|
||
|
|
//
|
||
|
|
// Flash Configurations
|
||
|
|
//
|
||
|
|
|
||
|
|
#define CPU1_FLASH_15MHZ_RWAIT (0x3UL)
|
||
|
|
#define CPU1_FLASH_DEFAULT_RWAIT (0xFUL)
|
||
|
|
#define CPU1_FLASH_15MHZ_TRIMENGRRWAIT (0x4UL)
|
||
|
|
#define CPU1_FLASH_DEFAULT_TRIMENGRRWAIT (0xFUL)
|
||
|
|
|
||
|
|
|
||
|
|
//When the ROM is run with an emulator connected, these four addresses are used
|
||
|
|
//to emulate OTP configuration.
|
||
|
|
#define EMU_BOOTPIN_CONFIG 0xD00 //Equivalent to GPREG1
|
||
|
|
#define EMU_BOOT_GPREG2 0xD02 //Equivalent to GPREG2
|
||
|
|
#define EMU_BOOTDEF_LOW 0xD04 //Equivalent to GPREG3
|
||
|
|
#define EMU_BOOTDEF_HIGH 0xD06 //Equivalent to BOOTCTRL
|
||
|
|
|
||
|
|
//Emulation boot pin configuration fields. Currently, only EMU_BOOTPIN_CONFIG_KEY
|
||
|
|
//is used.
|
||
|
|
#define EMU_BOOTPIN_CONFIG_KEY ((HWREG(EMU_BOOTPIN_CONFIG) & (uint32_t)0xFF000000UL) >> 24)
|
||
|
|
|
||
|
|
#define EMU_BOOTDEF_L(x) ((HWREG(EMU_BOOTDEF_LOW) & ((uint32_t)0xFFU << (8U*x))) >> (8U*x))
|
||
|
|
#define EMU_BOOTDEF_H(x) ((HWREG(EMU_BOOTDEF_HIGH) & ((uint32_t)0xFFU << (8U*x))) >> (8U*x))
|
||
|
|
|
||
|
|
//
|
||
|
|
// Standalone Boot Defines
|
||
|
|
//
|
||
|
|
|
||
|
|
//
|
||
|
|
// DCSM OTP Boot Configuration Registers
|
||
|
|
//
|
||
|
|
#define Z1_OTP_BOOTPIN_CONFIG (DCSM_Z1_BASE + (uint32_t)DCSM_O_Z1_GPREG1)
|
||
|
|
#define Z1_OTP_BOOT_GPREG2 (DCSM_Z1_BASE + (uint32_t)DCSM_O_Z1_GPREG2)
|
||
|
|
#define Z1_OTP_BOOTDEF_LOW (DCSM_Z1_BASE + (uint32_t)DCSM_O_Z1_GPREG3)
|
||
|
|
#define Z1_OTP_BOOTDEF_HIGH (DCSM_Z1_BASE + (uint32_t)DCSM_O_Z1_GPREG4)
|
||
|
|
#define Z2_OTP_BOOTPIN_CONFIG (DCSM_Z2_BASE + (uint32_t)DCSM_O_Z2_GPREG1)
|
||
|
|
#define Z2_OTP_BOOT_GPREG2 (DCSM_Z2_BASE + (uint32_t)DCSM_O_Z2_GPREG2)
|
||
|
|
#define Z2_OTP_BOOTDEF_LOW (DCSM_Z2_BASE + (uint32_t)DCSM_O_Z2_GPREG3)
|
||
|
|
#define Z2_OTP_BOOTDEF_HIGH (DCSM_Z2_BASE + (uint32_t)DCSM_O_Z2_GPREG4)
|
||
|
|
|
||
|
|
//
|
||
|
|
//DCSM Z1 CSM Key Mask Values
|
||
|
|
//
|
||
|
|
|
||
|
|
#define DCSM_Z1_CSMKEY0_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z1_CSMKEY1_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z1_CSMKEY2_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z1_CSMKEY3_MASK 0xFFFFFFFFUL
|
||
|
|
|
||
|
|
//
|
||
|
|
//DCSM Z2 CSM Key Mask Values
|
||
|
|
//
|
||
|
|
|
||
|
|
#define DCSM_Z2_CSMKEY0_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z2_CSMKEY1_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z2_CSMKEY2_MASK 0xFFFFFFFFUL
|
||
|
|
#define DCSM_Z2_CSMKEY3_MASK 0xFFFFFFFFUL
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
Z1-GPREG2[31:24] => VALIDITY_KEY (=0x5A);
|
||
|
|
Z1-GPREG2[23:8] => RESERVED; no usage defined yet.
|
||
|
|
Z1-GPREG2[7:6] => 00 - Run PBIST with PLL disabled (10MHz internal oscillator)
|
||
|
|
(includes CRC test on 64KB unsecure ROM)
|
||
|
|
01 - Run PBIST at 115MHz
|
||
|
|
10 - Run PBIST at 57.5MHz
|
||
|
|
11 - Do not run PBIST
|
||
|
|
Z1-GPREG2[5:4] => ERROR_STS_PIN config; this tells which GPIO pin is supposed to be used as ERROR_PIN and boot ROM configures the mux as such for the said pin.
|
||
|
|
0 - GPIO24, MUX Option 13
|
||
|
|
1 - GPIO28, MUX Option 13
|
||
|
|
2 - GPIO29, MUX Option 13
|
||
|
|
3 - ERROR_STS function Disable (default)
|
||
|
|
|
||
|
|
Z1-GPREG2[3:0] => CJTAGNODEID[3:0];
|
||
|
|
boot ROM takes this values and programs the lower 4 bits of the CJTAGNODEID register.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define HWREAD_Z1_OTP_BOOT_GPREG2_KEY ((HWREG(Z1_OTP_BOOT_GPREG2) & (uint32_t)0xFF000000UL) >> 24U)
|
||
|
|
#define HWREAD_Z2_OTP_BOOT_GPREG2_KEY ((HWREG(Z2_OTP_BOOT_GPREG2) & (uint32_t)0xFF000000UL) >> 24U)
|
||
|
|
|
||
|
|
#define ERRORSTS_OTP_VALUE_Z1 ((HWREG(Z1_OTP_BOOT_GPREG2) & (uint32_t)0x00000030UL) >> 4U)
|
||
|
|
#define ERRORSTS_OTP_VALUE_Z2 ((HWREG(Z2_OTP_BOOT_GPREG2) & (uint32_t)0x00000030UL) >> 4U)
|
||
|
|
#define ERRORSTS_PIN_NUMBER_1 24UL
|
||
|
|
#define ERRORSTS_PIN_NUMBER_2 28UL
|
||
|
|
#define ERRORSTS_PIN_NUMBER_3 29UL
|
||
|
|
#define ERRORSTS_PIN_NUMBER_INVALID 0xFFFFFFFFUL
|
||
|
|
|
||
|
|
#define ERRORSTS_PIN_24 0x0UL
|
||
|
|
#define ERRORSTS_PIN_28 0x1UL
|
||
|
|
#define ERRORSTS_PIN_29 0x2UL
|
||
|
|
|
||
|
|
#define GPREG2_KEY 0x5AU
|
||
|
|
|
||
|
|
#define GPREG2_PBIST_RUN_PLL_BYPASS 0x0UL
|
||
|
|
#define GPREG2_PBIST_RUN_SYSCLK_95MHZ 0x1UL
|
||
|
|
#define GPREG2_PBIST_RUN_SYSCLK_47_5MHZ 0x2UL
|
||
|
|
#define GPREG2_PBIST_DISABLED 0x3UL
|
||
|
|
|
||
|
|
#define PBIST_CHECKSUM_SUCCESS 0x0U
|
||
|
|
|
||
|
|
//
|
||
|
|
// Get key to validate Z1 OTP BOOTPIN_CONFIG
|
||
|
|
//
|
||
|
|
#define HWREAD_Z1_OTP_BOOTPIN_CONFIG_KEY ((HWREG(Z1_OTP_BOOTPIN_CONFIG) & (uint32_t)0xFF000000UL) >> 24U)
|
||
|
|
#define HWREAD_Z2_OTP_BOOTPIN_CONFIG_KEY ((HWREG(Z2_OTP_BOOTPIN_CONFIG) & (uint32_t)0xFF000000UL) >> 24U)
|
||
|
|
|
||
|
|
//
|
||
|
|
// Standalone macros to extract boot definition from BOOTDEF table at
|
||
|
|
// specified index
|
||
|
|
//
|
||
|
|
#define HWREAD_Z1_OTP_BOOTDEF_L(x) ((HWREG(Z1_OTP_BOOTDEF_LOW) & ((uint32_t)0xFFUL << (8UL*(x)))) >> (8UL*(x)))
|
||
|
|
#define HWREAD_Z1_OTP_BOOTDEF_H(x) ((HWREG(Z1_OTP_BOOTDEF_HIGH) & ((uint32_t)0xFFUL << (8UL*(x)))) >> (8UL*(x)))
|
||
|
|
#define HWREAD_Z2_OTP_BOOTDEF_L(x) ((HWREG(Z2_OTP_BOOTDEF_LOW) & ((uint32_t)0xFFUL << (8UL*(x)))) >> (8UL*(x)))
|
||
|
|
#define HWREAD_Z2_OTP_BOOTDEF_H(x) ((HWREG(Z2_OTP_BOOTDEF_HIGH) & ((uint32_t)0xFFUL << (8UL*(x)))) >> (8UL*(x)))
|
||
|
|
|
||
|
|
#define FACTORY_DEFAULT_BMSP0 32 //GPIO32
|
||
|
|
#define FACTORY_DEFAULT_BMSP1 24 //GPIO24
|
||
|
|
|
||
|
|
|
||
|
|
#define HWREAD_FLASH_ENTRY_POINT_OVERRIDE_KEY (HWREG(0x711D2UL))
|
||
|
|
#define HWREAD_FLASH_ENTRY_POINT_OVERRIDE_ADDR (HWREG(0x711D4UL))
|
||
|
|
|
||
|
|
//---------------------------------------------------------------------------
|
||
|
|
// Device Configuration
|
||
|
|
//
|
||
|
|
#define HWREAD_TI_OTP_PARTID_L (HWREG(0x711C2UL))
|
||
|
|
#define HWREAD_TI_OTP_PARTID_H (HWREG(0x711C4UL))
|
||
|
|
|
||
|
|
#define TI_OTP_ADDR_DC11 (0x711C7UL)
|
||
|
|
#define TI_OTP_ADDR_DC31 (0x711C8UL)
|
||
|
|
|
||
|
|
#define TI_OTP_ADDR_CPUROM_DC1 (0x711D6UL)
|
||
|
|
#define TI_OTP_ADDR_CPUROM_DC2 (0x711D7UL)
|
||
|
|
|
||
|
|
#define BROM_DCX_ENABLE_HIGH 0xFFFF0000UL
|
||
|
|
|
||
|
|
#define HWREAD_TI_OTP_PKG_TYPE (HWREGH(0x711C6UL))
|
||
|
|
#define PKG_TYPE_KEY 0x5AU
|
||
|
|
#define PKG_TPYE_32_QFN 0xCUL
|
||
|
|
#define TI_OTP_ANAREFCTL_ADDR (0x711CBUL)
|
||
|
|
|
||
|
|
#define TI_OTP_ADDR_PERCNF1 (0x711C9UL)
|
||
|
|
#define TI_OTP_ADDR_PERCNF2 (0x711CAUL)
|
||
|
|
#define PERCNF1_MASK 0x10U
|
||
|
|
#define PERCNF2_MASK 0x3U
|
||
|
|
|
||
|
|
#define TI_OTP_REG_VREGCTL_ENMASK (HWREGH(0x711E6UL))
|
||
|
|
#define BROM_ANALOG_SYSCTL_O_VREGCTL 0x006AU
|
||
|
|
#define VREGCTL_ENMASK_KEY 0x5AU
|
||
|
|
|
||
|
|
//bits15:8 is the KEY ; if Value == 0x5A then the remaining bits are valid
|
||
|
|
//bits 7:2 => reserved
|
||
|
|
//bits 0:1 if set to b'00 BROM will program 0x01 in VREGCTL.ENMASK
|
||
|
|
// - any other value the VREGCTL.ENMASK will be left at reset state.
|
||
|
|
|
||
|
|
#define TI_OTP_REG_VREGCTL_ENMASK_VAL ((TI_OTP_REG_VREGCTL_ENMASK) & 0x03U)
|
||
|
|
|
||
|
|
#define TI_OTP_REG_VREGCTL_ENMASK_KEY (((TI_OTP_REG_VREGCTL_ENMASK) & 0xFF00U) >> 0x8U)
|
||
|
|
|
||
|
|
//Bits [1:0] If 01, enable the PLL, otherwise leave it disabled
|
||
|
|
//Bits [7:2] PLL divider to use when the PLL is enabled
|
||
|
|
//Bits [31:24] If 0x5A, use this configuration word, otherwise use the default settings
|
||
|
|
#define OTP_BOOT_CONFIGURE_WORD_ADDRESS 0x711E0UL
|
||
|
|
#define BOOT_CONFIGURE_ENABLE_PLL 0x1U
|
||
|
|
//Bit 23 is used for enabling watchdog monitoring during boot time
|
||
|
|
//if the bit is 1 then it means the watchdog monitoring is enabled
|
||
|
|
#define BOOT_CONFIG_ENABLE_WD_S 23U
|
||
|
|
#define OTP_BOOT_CONFIG_M 0x000000FCUL
|
||
|
|
#define OTP_BOOT_CONFIG_S 0x2U
|
||
|
|
|
||
|
|
#define BOOTPIN_CONFIG_STANDALONE_KEY 0xA5U
|
||
|
|
#define BOOTPIN_CONFIG_KEY 0x5AUL
|
||
|
|
|
||
|
|
#define BOOTPIN_COFIG_KEY_MASK 0xFF000000UL
|
||
|
|
#define BOOTPIN_COFIG_KEY_START 24U
|
||
|
|
|
||
|
|
#define APLL_MULT_38 38UL
|
||
|
|
#define APLL_DIV_2 1UL
|
||
|
|
|
||
|
|
#define SYSCLK_DIV_1 0U
|
||
|
|
#define SYSCLK_DIV_2 1U
|
||
|
|
#define SYSCLK_DIV_4 2U
|
||
|
|
|
||
|
|
//
|
||
|
|
// Boot Selection Defines
|
||
|
|
//
|
||
|
|
#define CPU1_ALL_BMSP_DISABLED_MASK 0x00FFFFFFUL
|
||
|
|
#define CPU1_PIN_CONFIG_MASK 0xFFU
|
||
|
|
#define CPU1_BMSP_DISABLED 0xFFU
|
||
|
|
|
||
|
|
//
|
||
|
|
// OTP Keys
|
||
|
|
//
|
||
|
|
#define TI_OTP_KEY 0x5A5AU
|
||
|
|
#define TI_OTP_KEY_32B 0x5A5A5A5AUL
|
||
|
|
|
||
|
|
//
|
||
|
|
// SIMRESET Key
|
||
|
|
//
|
||
|
|
#define SIMRESET_KEY 0xA5A5UL
|
||
|
|
|
||
|
|
//
|
||
|
|
// DFT Keys
|
||
|
|
//
|
||
|
|
#define DFT_BOOT_DMLED_KEY 0xAA55AA55UL
|
||
|
|
#define DFT_BOOT_TEST_ALT_KEY 0x55AA55AAUL
|
||
|
|
|
||
|
|
//
|
||
|
|
// GPIO Pullup Config
|
||
|
|
//
|
||
|
|
#define HWREAD_TI_OTP_GPXPUD_KEY (HWREG(0x711CCUL))
|
||
|
|
#define HWREAD_TI_OTP_GPA_PUD_CONFIG (HWREG(0x711CEUL))
|
||
|
|
#define HWREAD_TI_OTP_GPB_PUD_CONFIG (HWREG(0x711D0UL))
|
||
|
|
|
||
|
|
//
|
||
|
|
//Masks for writes to GPA and GPB registers
|
||
|
|
//to pull up unbonded pins
|
||
|
|
//
|
||
|
|
#define GPA_WRITE_MASK 0xFFFFFFFFUL
|
||
|
|
#define GPB_WRITE_MASK 0xFFFFFFFFUL
|
||
|
|
|
||
|
|
//
|
||
|
|
// DCSM Offset Defines
|
||
|
|
//
|
||
|
|
#define DCSM_O_Zx_EXEONLYRAM 0x0UL
|
||
|
|
#define DCSM_O_Zx_EXEONLYSECT 0x2UL
|
||
|
|
#define DCSM_O_Zx_GRABRAM 0x4UL
|
||
|
|
#define DCSM_O_Zx_GRABSECT 0x6UL
|
||
|
|
|
||
|
|
//
|
||
|
|
// CPU1 Boot ROM Status Bit Fields
|
||
|
|
//
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_BOOT_MASK 0x000000FFUL
|
||
|
|
|
||
|
|
//
|
||
|
|
// CPU1 Boot mode status bit field starts from 0 and ends at 7
|
||
|
|
// It can take any values in the range 0 to 0xFF
|
||
|
|
//
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_SYSTEM_START_BOOT 0x00000001UL //Set during the initialization phase of the boot ROM
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_FLASH_BOOT 0x00000002UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_SECURE_FLASH_BOOT 0x00000003UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_PARALLEL_BOOT 0x00000004UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_RAM_BOOT 0x00000005UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_SCI_BOOT 0x00000006UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_SPI_BOOT 0x00000007UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_I2C_BOOT 0x00000008UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_CAN_BOOT 0x00000009UL
|
||
|
|
#define CPU1_BOOTROM_BOOTSTS_IN_WAIT_BOOT 0x0000000BUL
|
||
|
|
|
||
|
|
#define CPU1_BOOTROM_RAM_INIT_COMPLETE 0x00000100UL
|
||
|
|
#define CPU1_BOOTROM_DCSM_INIT_COMPLETE 0x00000200UL
|
||
|
|
#define CPU1_BOOTROM_POR_MEM_TEST_COMPLETE 0x00000400UL
|
||
|
|
#define CPU1_BOOTROM_RESC_HANDLED 0x00000800UL
|
||
|
|
#define CPU1_BOOTROM_HANDLED_XRSN 0x00001000UL
|
||
|
|
#define CPU1_BOOTROM_HANDLED_POR 0x00002000UL
|
||
|
|
#define CPU1_BOOTROM_WATCHDOG_SELFTEST_FAIL 0x00004000UL
|
||
|
|
#define CPU1_BOOTROM_BOOT_COMPLETE 0x00008000UL
|
||
|
|
|
||
|
|
#define CPU1_BOOTROM_GOT_ITRAP 0x00010000UL
|
||
|
|
#define CPU1_BOOTROM_GOT_A_PIE_MISMATCH 0x00020000UL
|
||
|
|
#define CPU1_BOOTROM_GOT_AN_ERAD_NMI 0x00040000UL
|
||
|
|
#define CPU1_BOOTROM_GOT_A_RL_NMI 0x00080000UL
|
||
|
|
#define CPU1_BOOTROM_GOT_A_MEM_UNCERR_NMI 0x00100000UL
|
||
|
|
#define CPU1_BOOTROM_GOT_A_MCLK_NMI 0x00400000UL
|
||
|
|
|
||
|
|
#define BOOTROM_PLL_ENABLE_SUCCESS 0x01000000UL
|
||
|
|
#define CPU1_BOOTROM_DCSM_INIT_INVALID_LP 0x02000000UL
|
||
|
|
#define CPU1_BOOTROM_DCSM_INIT_LP_ERROR_SET 0x04000000UL
|
||
|
|
#define CPU1_BOOTROM_FLASH_VERIFICATION_ERROR 0x08000000UL
|
||
|
|
#define CPU1_BOOTROM_RAM_INIT_ERROR 0x10000000UL
|
||
|
|
#define CPU1_BOOTROM_TRIM_LOAD_ERROR 0x20000000UL
|
||
|
|
#define CPU1_BOOTROM_FLASH_2T_NOT_READY 0x40000000UL
|
||
|
|
|
||
|
|
#define BROM_FLASH_ALL_START 0x80000UL
|
||
|
|
#define BROM_FLASH_ALL_END 0xA0000UL
|
||
|
|
|
||
|
|
//
|
||
|
|
//Mask for NMI enable bit (bit 0)
|
||
|
|
//
|
||
|
|
#define NMI_ENABLE_MASK 0x1U
|
||
|
|
|
||
|
|
//
|
||
|
|
// Lower word mask
|
||
|
|
//
|
||
|
|
#define WORD_MASK 0xFFFFU
|
||
|
|
|
||
|
|
#ifndef LDRA_FILEIO
|
||
|
|
//
|
||
|
|
// Watchdog prescaler and prediv values
|
||
|
|
//
|
||
|
|
//
|
||
|
|
// setting prescale and prediv values to get timeout of 209.6 ms
|
||
|
|
//
|
||
|
|
#define WD_PRESCALE_VALUE SYSCTL_WD_PRESCALE_8
|
||
|
|
#define WD_PREDIV_VALUE SYSCTL_WD_PREDIV_1024
|
||
|
|
#else
|
||
|
|
#define WD_PRESCALE_VALUE SYSCTL_WD_PRESCALE_16
|
||
|
|
#define WD_PREDIV_VALUE SYSCTL_WD_PREDIV_2048
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//
|
||
|
|
// the reset values of prescalar and prediv
|
||
|
|
//
|
||
|
|
#define WD_DEF_PRESCALE_VALUE SYSCTL_WD_PRESCALE_1
|
||
|
|
#define WD_DEF_PREDIV_VALUE SYSCTL_WD_PREDIV_512
|
||
|
|
|
||
|
|
#ifndef LDRA_FILEIO
|
||
|
|
//
|
||
|
|
// min values of prediv and prescale values so as to ensure maximum speed for watchdog clk
|
||
|
|
//
|
||
|
|
#define WD_PRESCALE_VALUE_MIN SYSCTL_WD_PRESCALE_1
|
||
|
|
#define WD_PREDIV_VALUE_MIN SYSCTL_WD_PREDIV_2
|
||
|
|
#else
|
||
|
|
//
|
||
|
|
// min values of prediv and prescale values so as to ensure maximum speed for watchdog clk
|
||
|
|
//
|
||
|
|
#define WD_PRESCALE_VALUE_MIN SYSCTL_WD_PRESCALE_8
|
||
|
|
#define WD_PREDIV_VALUE_MIN SYSCTL_WD_PREDIV_512
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//
|
||
|
|
// Function prototypes
|
||
|
|
//
|
||
|
|
extern void cbrom_configure_flash(void);
|
||
|
|
extern uint32_t Gather_Bx_Zx_ZSB(uint16_t bank, uint16_t zone, uint32_t *csmkey);
|
||
|
|
|
||
|
|
extern interrupt void CPU1BROM_itrapISR(void);
|
||
|
|
extern interrupt void CPU1BROM_nmiHandler(void);
|
||
|
|
|
||
|
|
extern uint32_t I2C_Boot(uint32_t bootMode);
|
||
|
|
extern uint32_t SCI_Boot(uint32_t bootMode);
|
||
|
|
extern uint32_t SPI_Boot(uint32_t bootMode);
|
||
|
|
uint32_t DCAN_Boot(uint32_t bootMode, uint32_t bitTimingRegValue, uint16_t switchToXTAL);
|
||
|
|
extern uint32_t SPI_Alternate_IO_Boot(void);
|
||
|
|
extern uint32_t Parallel_Boot(uint32_t BootMode);
|
||
|
|
|
||
|
|
extern uint32_t CPU1BROM_selectBootMode(void);
|
||
|
|
|
||
|
|
extern void CPU1BROM_triggerSysPLLLock(uint32_t multiplier, uint32_t divider);
|
||
|
|
extern uint16_t CPU1BROM_switchToPLL(uint32_t bootConfig);
|
||
|
|
extern uint32_t PBIST_PORMemoryTest(void);
|
||
|
|
extern void CPU1BROM_devcalInit(void);
|
||
|
|
extern void CPU1BROM_configureHardwarePatching(uint32_t startAddress);
|
||
|
|
|
||
|
|
#endif //C_BOOTROM_H_
|