//###########################################################################
//
// FILE:   cla.h
//
// TITLE:  CLA Driver Implementation File
//
//###########################################################################
// $Copyright:
// Copyright (C) 2022 Texas Instruments Incorporated - http://www.ti.com
//
// Redistribution and use in source and binary forms, with or without 
// modification, are permitted provided that the following conditions 
// are met:
// 
//   Redistributions of source code must retain the above copyright 
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the 
//   documentation and/or other materials provided with the   
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################

#ifndef CLA_H
#define CLA_H

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
//! \addtogroup cla_api CLA
//! \brief This module is used for configurating CLA.
//! @{
//
//*****************************************************************************

#include <stdint.h>
#include <stdbool.h>
#include "cpu.h"
#include "debug.h"
#include "inc/hw_cla.h"
#include "inc/hw_memmap.h"
#include "inc/hw_sysctl.h"
#include "inc/hw_types.h"

//*****************************************************************************
//
// Useful defines used within the driver functions. Not intended for use by
// application code.
//
//*****************************************************************************
#define CLA_NUM_EOT_INTERRUPTS          (8U)

#ifdef __TMS320C28XX__  // This enum is only accessible by C28x
//*****************************************************************************
//
//! Values that can be passed to CLA_getBackgroundTaskStatus() as the
//! \e stsFlag parameter.
//
//*****************************************************************************
typedef enum
{
    //! Run status
    CLA_BGSTS_RUNNING          = CLA_MSTSBGRND_RUN,
    //! Can BG task be interrupted?
    CLA_BGSTS_CANNOT_INTERRUPT = CLA_MSTSBGRND_BGINTM,
    //! BG task hardware trigger overflow - if a second trigger occurs
    //! while the BG is already running, the overflow is set
    CLA_BGSTS_OVERFLOW         = CLA_MSTSBGRND_BGOVF
} CLA_BGTaskStatus;
#endif // __TMS320C28XX__

//*****************************************************************************
//
// Values that can be passed to CLA_clearTaskFlags(), CLA_forceTasks(),
// and CLA_enableTasks(), CLA_disableTasks(), and CLA_enableSoftwareInterrupt()
// as the taskFlags parameter.
//
//*****************************************************************************
#define CLA_TASKFLAG_1          (0x01U)  //!< CLA Task 1 Flag
#define CLA_TASKFLAG_2          (0x02U)  //!< CLA Task 2 Flag
#define CLA_TASKFLAG_3          (0x04U)  //!< CLA Task 3 Flag
#define CLA_TASKFLAG_4          (0x08U)  //!< CLA Task 4 Flag
#define CLA_TASKFLAG_5          (0x10U)  //!< CLA Task 5 Flag
#define CLA_TASKFLAG_6          (0x20U)  //!< CLA Task 6 Flag
#define CLA_TASKFLAG_7          (0x40U)  //!< CLA Task 7 Flag
#define CLA_TASKFLAG_8          (0x80U)  //!< CLA Task 8 Flag
#define CLA_TASKFLAG_ALL        (0xFFU)  //!< CLA All Task Flag

//*****************************************************************************
//
//! Values that can be passed to CLA_getPendingTaskFlag(),
//! CLA_getTaskOverflowFlag(), CLA_getTaskRunStatus(), CLA_setTriggerSource(),
//! CLA_registerEndOfTaskInterrupt(), and CLA_unregisterEndOfTaskInterrupt()
//! as the taskNumber parameter.
//
//*****************************************************************************
typedef enum
{
    CLA_TASK_1,  //!< CLA Task 1
    CLA_TASK_2,  //!< CLA Task 2
    CLA_TASK_3,  //!< CLA Task 3
    CLA_TASK_4,  //!< CLA Task 4
    CLA_TASK_5,  //!< CLA Task 5
    CLA_TASK_6,  //!< CLA Task 6
    CLA_TASK_7,  //!< CLA Task 7
    CLA_TASK_8   //!< CLA Task 8
} CLA_TaskNumber;

#ifdef __TMS320C28XX__  // These enums are only accessible by C28x
//*****************************************************************************
//
//! Values that can be passed to CLA_mapTaskVector() as the \e claIntVect
//! parameter.
//
//*****************************************************************************
typedef enum
{
    CLA_MVECT_1 = CLA_O_MVECT1,     //!< Task Interrupt Vector 1
    CLA_MVECT_2 = CLA_O_MVECT2,     //!< Task Interrupt Vector 2
    CLA_MVECT_3 = CLA_O_MVECT3,     //!< Task Interrupt Vector 3
    CLA_MVECT_4 = CLA_O_MVECT4,     //!< Task Interrupt Vector 4
    CLA_MVECT_5 = CLA_O_MVECT5,     //!< Task Interrupt Vector 5
    CLA_MVECT_6 = CLA_O_MVECT6,     //!< Task Interrupt Vector 6
    CLA_MVECT_7 = CLA_O_MVECT7,     //!< Task Interrupt Vector 7
    CLA_MVECT_8 = CLA_O_MVECT8      //!< Task Interrupt Vector 8
} CLA_MVECTNumber;

//*****************************************************************************
//
//! Values that can be passed to CLA_setTriggerSource() as the \e trigger
//! parameter.
//
//*****************************************************************************
typedef enum
{
    CLA_TRIGGER_SOFTWARE    = 0U,   //!< CLA Task Trigger Source is Software

    CLA_TRIGGER_ADCA1       = 1U,   //!< CLA Task Trigger Source is ADCA1
    CLA_TRIGGER_ADCA2       = 2U,   //!< CLA Task Trigger Source is ADCA2
    CLA_TRIGGER_ADCA3       = 3U,   //!< CLA Task Trigger Source is ADCA3
    CLA_TRIGGER_ADCA4       = 4U,   //!< CLA Task Trigger Source is ADCA4
    CLA_TRIGGER_ADCAEVT     = 5U,   //!< CLA Task Trigger Source is ADCAEVT
    CLA_TRIGGER_ADCB1       = 6U,   //!< CLA Task Trigger Source is ADCB1
    CLA_TRIGGER_ADCB2       = 7U,   //!< CLA Task Trigger Source is ADCB2
    CLA_TRIGGER_ADCB3       = 8U,   //!< CLA Task Trigger Source is ADCB3
    CLA_TRIGGER_ADCB4       = 9U,   //!< CLA Task Trigger Source is ADCB4
    CLA_TRIGGER_ADCBEVT     = 10U,  //!< CLA Task Trigger Source is ADCBEVT
    CLA_TRIGGER_ADCC1       = 11U,  //!< CLA Task Trigger Source is ADCC1
    CLA_TRIGGER_ADCC2       = 12U,  //!< CLA Task Trigger Source is ADCC2
    CLA_TRIGGER_ADCC3       = 13U,  //!< CLA Task Trigger Source is ADCC3
    CLA_TRIGGER_ADCC4       = 14U,  //!< CLA Task Trigger Source is ADCC4
    CLA_TRIGGER_ADCCEVT     = 15U,  //!< CLA Task Trigger Source is ADCCEVT
    CLA_TRIGGER_ADCD1       = 16U,  //!< CLA Task Trigger Source is ADCD1
    CLA_TRIGGER_ADCD2       = 17U,  //!< CLA Task Trigger Source is ADCD2
    CLA_TRIGGER_ADCD3       = 18U,  //!< CLA Task Trigger Source is ADCD3
    CLA_TRIGGER_ADCD4       = 19U,  //!< CLA Task Trigger Source is ADCD4
    CLA_TRIGGER_ADCDEVT     = 20U,  //!< CLA Task Trigger Source is ADCDEVT

    CLA_TRIGGER_XINT1       = 29U,  //!< CLA Task Trigger Source is XINT1
    CLA_TRIGGER_XINT2       = 30U,  //!< CLA Task Trigger Source is XINT2
    CLA_TRIGGER_XINT3       = 31U,  //!< CLA Task Trigger Source is XINT3
    CLA_TRIGGER_XINT4       = 32U,  //!< CLA Task Trigger Source is XINT4
    CLA_TRIGGER_XINT5       = 33U,  //!< CLA Task Trigger Source is XINT5

    CLA_TRIGGER_EPWM1INT    = 36U,  //!< CLA Task Trigger Source is EPWM1INT
    CLA_TRIGGER_EPWM2INT    = 37U,  //!< CLA Task Trigger Source is EPWM2INT
    CLA_TRIGGER_EPWM3INT    = 38U,  //!< CLA Task Trigger Source is EPWM3INT
    CLA_TRIGGER_EPWM4INT    = 39U,  //!< CLA Task Trigger Source is EPWM4INT
    CLA_TRIGGER_EPWM5INT    = 40U,  //!< CLA Task Trigger Source is EPWM5INT
    CLA_TRIGGER_EPWM6INT    = 41U,  //!< CLA Task Trigger Source is EPWM6INT
    CLA_TRIGGER_EPWM7INT    = 42U,  //!< CLA Task Trigger Source is EPWM7INT
    CLA_TRIGGER_EPWM8INT    = 43U,  //!< CLA Task Trigger Source is EPWM8INT
    CLA_TRIGGER_EPWM9INT    = 44U,  //!< CLA Task Trigger Source is EPWM9INT
    CLA_TRIGGER_EPWM10INT   = 45U,  //!< CLA Task Trigger Source is EPWM10INT
    CLA_TRIGGER_EPWM11INT   = 46U,  //!< CLA Task Trigger Source is EPWM11INT
    CLA_TRIGGER_EPWM12INT   = 47U,  //!< CLA Task Trigger Source is EPWM12INT
    CLA_TRIGGER_EPWM13INT   = 48U,  //!< CLA Task Trigger Source is EPWM13INT
    CLA_TRIGGER_EPWM14INT   = 49U,  //!< CLA Task Trigger Source is EPWM14INT
    CLA_TRIGGER_EPWM15INT   = 50U,  //!< CLA Task Trigger Source is EPWM15INT
    CLA_TRIGGER_EPWM16INT   = 51U,  //!< CLA Task Trigger Source is EPWM16INT

    CLA_TRIGGER_MCANA_FEVT0 = 52U,  //!< CLA Task Trigger Source is MCANAFEVT0
    CLA_TRIGGER_MCANA_FEVT1 = 53U,  //!< CLA Task Trigger Source is MCANAFEVT1
    CLA_TRIGGER_MCANA_FEVT2 = 54U,  //!< CLA Task Trigger Source is MCANAFEVT2

    CLA_TRIGGER_TINT0       = 68U,  //!< CLA Task Trigger Source is TINT0
    CLA_TRIGGER_TINT1       = 69U,  //!< CLA Task Trigger Source is TINT1
    CLA_TRIGGER_TINT2       = 70U,  //!< CLA Task Trigger Source is TINT2

    CLA_TRIGGER_MXINTA      = 71U,  //!< CLA Task Trigger Source is MXINTA
    CLA_TRIGGER_MRINTA      = 72U,  //!< CLA Task Trigger Source is MRINTA
    CLA_TRIGGER_MXINTB      = 73U,  //!< CLA Task Trigger Source is MXINTB
    CLA_TRIGGER_MRINTB      = 74U,  //!< CLA Task Trigger Source is MRINTB

    CLA_TRIGGER_ECAP1INT    = 75U,  //!< CLA Task Trigger Source is ECAP1INT
    CLA_TRIGGER_ECAP2INT    = 76U,  //!< CLA Task Trigger Source is ECAP2INT
    CLA_TRIGGER_ECAP3INT    = 77U,  //!< CLA Task Trigger Source is ECAP3INT
    CLA_TRIGGER_ECAP4INT    = 78U,  //!< CLA Task Trigger Source is ECAP4INT
    CLA_TRIGGER_ECAP5INT    = 79U,  //!< CLA Task Trigger Source is ECAP5INT
    CLA_TRIGGER_ECAP6INT    = 80U,  //!< CLA Task Trigger Source is ECAP6INT
    CLA_TRIGGER_ECAP7INT    = 81U,  //!< CLA Task Trigger Source is ECAP7INT

    CLA_TRIGGER_EQEP1INT    = 83U,  //!< CLA Task Trigger Source is EQEP1INT
    CLA_TRIGGER_EQEP2INT    = 84U,  //!< CLA Task Trigger Source is EQEP2INT
    CLA_TRIGGER_EQEP3INT    = 85U,  //!< CLA Task Trigger Source is EQEP3INT

    CLA_TRIGGER_ECAP6INT2   = 92U,  //!< CLA Task Trigger Source is ECAP6INT2
    CLA_TRIGGER_ECAP7INT2   = 93U,  //!< CLA Task Trigger Source is ECAP7INT2

    CLA_TRIGGER_SDFM1INT    = 95U,  //!< CLA Task Trigger Source is SDFM1INT
    CLA_TRIGGER_SDFM2INT    = 96U,  //!< CLA Task Trigger Source is SDFM2INT

    CLA_TRIGGER_ECATSYNC0INT = 103U, //!< CLA Task Trigger Src is ECATSYNC0INT
    CLA_TRIGGER_ECATSYNC1INT = 104U, //!< CLA Task Trigger Src is ECATSYNC1INT

    CLA_TRIGGER_PMBUSAINT   = 105U, //!< CLA Task Trigger Source is PMBUSAINT


    CLA_TRIGGER_SPITXAINT   = 109U, //!< CLA Task Trigger Source is SPITXAINT
    CLA_TRIGGER_SPIRXAINT   = 110U, //!< CLA Task Trigger Source is SPIRXAINT
    CLA_TRIGGER_SPITXBINT   = 111U, //!< CLA Task Trigger Source is SPITXBINT
    CLA_TRIGGER_SPIRXBINT   = 112U, //!< CLA Task Trigger Source is SPIRXBINT
    CLA_TRIGGER_SPITXCINT   = 113U, //!< CLA Task Trigger Source is SPITXCINT
    CLA_TRIGGER_SPIRXCINT   = 114U, //!< CLA Task Trigger Source is SPIRXCINT
    CLA_TRIGGER_SPITXDINT   = 115U, //!< CLA Task Trigger Source is SPITXDINT
    CLA_TRIGGER_SPIRXDINT   = 116U, //!< CLA Task Trigger Source is SPIRXDINT


    CLA_TRIGGER_CLB5INT      = 117U, //!< CLA Task Trigger Source is CLB5INT
    CLA_TRIGGER_CLB6INT      = 118U, //!< CLA Task Trigger Source is CLB6INT
    CLA_TRIGGER_CLB7INT      = 119U, //!< CLA Task Trigger Source is CLB7INT
    CLA_TRIGGER_CLB8INT      = 120U, //!< CLA Task Trigger Source is CLB8INT

    CLA_TRIGGER_CLA1CRCINT  = 121U, //!< CLA Task Trigger Srce is CLA1CRCINT

    CLA_TRIGGER_FSITXAINT1  = 123U, //!< CLA Task Trigger Source is FSITXAINT1
    CLA_TRIGGER_FSITXAINT2  = 124U, //!< CLA Task Trigger Source is FSITXAINT2
    CLA_TRIGGER_FSIRXAINT1  = 125U, //!< CLA Task Trigger Source is FSIRXAINT1
    CLA_TRIGGER_FSIRXAINT2  = 126U, //!< CLA Task Trigger Source is FSIRXAINT2

    CLA_TRIGGER_CLB1INT      = 127, //!< CLA Task Trigger Source is CLB1INT
    CLA_TRIGGER_CLB2INT      = 128, //!< CLA Task Trigger Source is CLB2INT
    CLA_TRIGGER_CLB3INT      = 129, //!< CLA Task Trigger Source is CLB3INT
    CLA_TRIGGER_CLB4INT      = 130, //!< CLA Task Trigger Source is CLB4INT

    CLA_TRIGGER_SDFM1DRINT1 = 143U, //!< CLA Task Trigger Srce is SDFM1DRINT1
    CLA_TRIGGER_SDFM1DRINT2 = 144U, //!< CLA Task Trigger Srce is SDFM1DRINT2
    CLA_TRIGGER_SDFM1DRINT3 = 145U, //!< CLA Task Trigger Srce is SDFM1DRINT3
    CLA_TRIGGER_SDFM1DRINT4 = 146U, //!< CLA Task Trigger Srce is SDFM1DRINT4
    CLA_TRIGGER_SDFM2DRINT1 = 147U, //!< CLA Task Trigger Srce is SDFM2DRINT1
    CLA_TRIGGER_SDFM2DRINT2 = 148U, //!< CLA Task Trigger Srce is SDFM2DRINT2
    CLA_TRIGGER_SDFM2DRINT3 = 149U, //!< CLA Task Trigger Srce is SDFM2DRINT3
    CLA_TRIGGER_SDFM2DRINT4 = 150U, //!< CLA Task Trigger Srce is SDFM2DRINT4

    CLA_TRIGGER_FSITXBINT1  = 155U, //!< CLA Task Trigger Source is FSITXBINT1
    CLA_TRIGGER_FSITXBINT2  = 156U, //!< CLA Task Trigger Source is FSITXBINT2
    CLA_TRIGGER_FSIRXBINT1  = 157U, //!< CLA Task Trigger Source is FSIRXBINT1
    CLA_TRIGGER_FSIRXBINT2  = 158U, //!< CLA Task Trigger Source is FSIRXBINT2
    CLA_TRIGGER_FSIRXCINT1  = 159U, //!< CLA Task Trigger Source is FSIRXCINT1
    CLA_TRIGGER_FSIRXCINT2  = 160U, //!< CLA Task Trigger Source is FSIRXCINT2
    CLA_TRIGGER_FSIRXDINT1  = 161U, //!< CLA Task Trigger Source is FSIRXDINT1
    CLA_TRIGGER_FSIRXDINT2  = 162U, //!< CLA Task Trigger Source is FSIRXDINT2
    CLA_TRIGGER_FSIRXEINT1  = 163U, //!< CLA Task Trigger Source is FSIRXEINT1
    CLA_TRIGGER_FSIRXEINT2  = 164U, //!< CLA Task Trigger Source is FSIRXEINT2
    CLA_TRIGGER_FSIRXFINT1  = 165U, //!< CLA Task Trigger Source is FSIRXFINT1
    CLA_TRIGGER_FSIRXFINT2  = 166U, //!< CLA Task Trigger Source is FSIRXFINT2
    CLA_TRIGGER_FSIRXGINT1  = 167U, //!< CLA Task Trigger Source is FSIRXGINT1
    CLA_TRIGGER_FSIRXGINT2  = 168U, //!< CLA Task Trigger Source is FSIRXGINT2
    CLA_TRIGGER_FSIRXHINT1  = 169U, //!< CLA Task Trigger Source is FSIRXHINT1
    CLA_TRIGGER_FSIRXHINT2  = 170U  //!< CLA Task Trigger Source is FSIRXHINT2
} CLA_Trigger;
#endif // __TMS320C28XX__

//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
//*****************************************************************************
//
//! \internal
//! Checks a CLA base address.
//!
//! \param base is the base address of the CLA controller.
//!
//! This function determines if a CLA controller base address is valid.
//!
//! \return Returns \b true if the base address is valid and \b false
//! otherwise.
//
//*****************************************************************************
#ifdef DEBUG
static inline bool
CLA_isBaseValid(uint32_t base)
{
    return(base == CLA1_BASE);
}
#endif

#ifdef __TMS320C28XX__ // These functions are only accessible from the C28x
//*****************************************************************************
//
//! Map CLA Task Interrupt Vector
//!
//! \param base is the base address of the CLA controller.
//! \param claIntVect is CLA interrupt vector (MVECT1 to MVECT8)
//! the value of claIntVect can be any of the following:
//! - \b CLA_MVECT_1 - Task Interrupt Vector 1
//! - \b CLA_MVECT_2 - Task Interrupt Vector 2
//! - \b CLA_MVECT_3 - Task Interrupt Vector 3
//! - \b CLA_MVECT_4 - Task Interrupt Vector 4
//! - \b CLA_MVECT_5 - Task Interrupt Vector 5
//! - \b CLA_MVECT_6 - Task Interrupt Vector 6
//! - \b CLA_MVECT_7 - Task Interrupt Vector 7
//! - \b CLA_MVECT_8 - Task Interrupt Vector 8
//! \param claTaskAddr is the start address of the code for task
//!
//! Each CLA Task (1 to 8) has its own MVECTx register. When a task is
//! triggered, the CLA loads the MVECTx register of the task in question
//! to the MPC (CLA program counter) and begins execution from that point.
//! The CLA has a 16-bit address bus, and can therefore, access the lower
//! 64 KW space. The MVECTx registers take an address anywhere in this space.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_mapTaskVector(uint32_t base, CLA_MVECTNumber claIntVect,
                  uint16_t claTaskAddr)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    HWREGH(base + (uint16_t)claIntVect) = claTaskAddr;

    EDIS;
}

//*****************************************************************************
//
//! Hard Reset
//!
//! \param base is the base address of the CLA controller.
//!
//! This function will cause a hard reset of the CLA and set all CLA registers
//! to their default state.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_performHardReset(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Hard reset of the CLA
    //
    HWREGH(base + CLA_O_MCTL) |= CLA_MCTL_HARDRESET;

    EDIS;

    //
    // Wait for few cycles till the reset is complete
    //
    NOP;
    NOP;
    NOP;
}

//*****************************************************************************
//
//! Soft Reset
//!
//! \param base is the base address of the CLA controller.
//!
//! This function will cause a soft reset of the CLA. This will stop the
//! current task, clear the MIRUN flag and clear all bits in the MIER register.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_performSoftReset(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Soft reset of the CLA
    //
    HWREGH(base + CLA_O_MCTL) |= CLA_MCTL_SOFTRESET;

    EDIS;

    //
    // Wait for few cycles till the reset is complete
    //
    NOP;
    NOP;
    NOP;
}

//*****************************************************************************
//
//! IACK enable
//!
//! \param base is the base address of the CLA controller.
//!
//! This function enables the main CPU to use the IACK #16bit instruction to
//! set MIFR bits in the same manner as writing to the MIFRC register.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_enableIACK(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Enable the main CPU to use the IACK #16bit instruction
    //
    HWREGH(base + CLA_O_MCTL) |= CLA_MCTL_IACKE;

    EDIS;
}

//*****************************************************************************
//
//! IACK disable
//!
//! \param base is the base address of the CLA controller.
//!
//! This function disables the main CPU to use the IACK #16bit instruction to
//! set MIFR bits in the same manner as writing to the MIFRC register.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_disableIACK(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Enable the main CPU to use the IACK #16bit instruction
    //
    HWREGH(base + CLA_O_MCTL) &= ~CLA_MCTL_IACKE;

    EDIS;
}

//*****************************************************************************
//
//! Query task N to see if it is flagged and pending execution
//!
//! \param base is the base address of the CLA controller.
//! \param taskNumber is the number of the task CLA_TASK_N where N is a number
//! from 1 to 8. Do not use CLA_TASKFLAG_ALL.
//!
//! This function gets the status of each bit in the interrupt flag register
//! corresponds to a CLA task.  The corresponding bit is automatically set
//! when the task is triggered (either from a peripheral, through software, or
//! through the MIFRC register). The bit gets cleared when the CLA starts to
//! execute the flagged task.
//!
//! \return \b True if the queried task has been triggered but pending
//! execution.
//
//*****************************************************************************
static inline bool
CLA_getPendingTaskFlag(uint32_t base, CLA_TaskNumber taskNumber)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Read the run status register and return the appropriate value.
    //
    return(((HWREGH(base + CLA_O_MIFR) >> (uint16_t)taskNumber) & 1U) != 0U);
}

//*****************************************************************************
//
//! Get status of All Task Interrupt Flag
//!
//! \param base is the base address of the CLA controller.
//!
//! This function gets the value of the interrupt flag register (MIFR)
//!
//! \return the value of Interrupt Flag Register (MIFR)
//
//*****************************************************************************
static inline uint16_t
CLA_getAllPendingTaskFlags(uint32_t base)
{
    uint16_t status;

    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Just return the Interrupt Flag Register (MIFR) since that is what was
    // requested.
    //
    status = HWREGH(base + CLA_O_MIFR);

    //
    // Return the Interrupt Flag Register value
    //
    return(status);
}

//*****************************************************************************
//
//! Get status of Task n Interrupt Overflow Flag
//!
//! \param base is the base address of the CLA controller.
//! \param taskNumber is the number of the task CLA_TASK_N where N is a number
//! from 1 to 8. Do not use CLA_TASKFLAG_ALL.
//!
//! This function gets the status of each bit in the overflow flag register
//! corresponds to a CLA task, This bit is set when an interrupt overflow event
//! has occurred for the specific task.
//!
//! \return True if any of task interrupt overflow has occurred.
//
//*****************************************************************************
static inline bool
CLA_getTaskOverflowFlag(uint32_t base, CLA_TaskNumber taskNumber)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Read the run status register and return the appropriate value.
    //
    return(((HWREGH(base + CLA_O_MIOVF) >> (uint16_t)taskNumber) & 1U) != 0U);
}

//*****************************************************************************
//
//! Get status of All Task Interrupt Overflow Flag
//!
//! \param base is the base address of the CLA controller.
//!
//! This function gets the value of the Interrupt Overflow Flag Register
//!
//! \return the value of Interrupt Overflow Flag Register(MIOVF)
//
//*****************************************************************************
static inline uint16_t
CLA_getAllTaskOverflowFlags(uint32_t base)
{
    uint16_t status;

    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Just return Interrupt Overflow Flag Register(MIOVF) since that is what
    // was requested.
    //
    status = HWREGH(base + CLA_O_MIOVF);

    //
    // Return the Interrupt Overflow Flag Register
    //
    return(status);
}

//*****************************************************************************
//
//! Clear the task interrupt flag
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks' flags to be cleared
//! CLA_TASKFLAG_N where N is the task number from 1 to 8, or CLA_TASKFLAG_ALL
//! to clear all flags.
//!
//! This function is used to manually clear bits in the interrupt
//! flag (MIFR) register
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_clearTaskFlags(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    //Modify protected register
    //
    EALLOW;

    //
    // Clear the task interrupt flag
    //
    HWREGH(base + CLA_O_MICLR) |= taskFlags;

    EDIS;
}

//*****************************************************************************
//
//! Force a CLA Task
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks' flags to be forced
//! CLA_TASKFLAG_N where N is the task number from 1 to 8, or CLA_TASKFLAG_ALL
//! to force all tasks.
//!
//! This function forces a task through software.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_forceTasks(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Force the task interrupt.
    //
    HWREGH(base + CLA_O_MIFRC) |= taskFlags;

    EDIS;
}

//*****************************************************************************
//
//! Enable CLA task(s)
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks' flags to be enabled
//! CLA_TASKFLAG_N where N is the task number from 1 to 8, or CLA_TASKFLAG_ALL
//! to enable all tasks
//!
//! This function allows an incoming interrupt or main CPU software to
//! start the corresponding CLA task.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_enableTasks(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Enable CLA task
    //
    HWREGH(base + CLA_O_MIER) |= taskFlags;

    EDIS;
}

//*****************************************************************************
//
//! Disable CLA task interrupt
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks' flags to be disabled
//! CLA_TASKFLAG_N where N is the task number from 1 to 8, or CLA_TASKFLAG_ALL
//! to disable all tasks
//!
//! This function disables CLA task interrupt by setting the MIER register bit
//! to 0, while the corresponding task is executing this will have no effect
//! on the task. The task will continue to run until it hits the MSTOP
//! instruction.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_disableTasks(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Disable CLA task interrupt
    //
    HWREGH(base + CLA_O_MIER) &= ~taskFlags;

    EDIS;
}

//*****************************************************************************
//
//! Get the value of a task run status
//!
//! \param base is the base address of the CLA controller.
//! \param taskNumber is the number of the task CLA_TASK_N where N is a number
//! from 1 to 8. Do not use CLA_TASKFLAG_ALL.
//!
//! This function gets the status of each bit in the Interrupt Run Status
//! Register which indicates whether the task is currently executing
//!
//! \return True if the task is executing.
//
//*****************************************************************************
static inline bool
CLA_getTaskRunStatus(uint32_t base, CLA_TaskNumber taskNumber)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Read the run status register and return the appropriate value.
    //
    return(((HWREGH(base + CLA_O_MIRUN) >> (uint16_t)taskNumber) & 1U) != 0U);
}

//*****************************************************************************
//
//! Get the value of all task run status
//!
//! \param base is the base address of the CLA controller.
//!
//! This function indicates which task is currently executing.
//!
//! \return the value of Interrupt Run Status Register (MIRUN)
//
//*****************************************************************************
static inline uint16_t
CLA_getAllTaskRunStatus(uint32_t base)
{
    uint16_t status;

    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Just return the Interrupt Run Status Register since that is what was
    // requested.
    //
    status = HWREGH(base + CLA_O_MIRUN);

    //
    // Return the Interrupt Run Status Register (MIRUN)
    //
    return(status);
}
//*****************************************************************************
//
//! Get the value of Active register for MVECTBGRNDACTIVE
//!
//! \param base is the base address of the CLA controller.
//!
//! This function gives the current interrupted MPC value of the background
//! task.
//!
//! \return the value of Active register for the Background Task Vector
//
//*****************************************************************************
static inline uint16_t
CLA_getBackgroundActiveVector(uint32_t base)
{
    uint16_t status;

    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Just return the Active register for the Background Task Vector since
    // that is what was requested.
    //
    status = HWREGH(base + CLA_O_MVECTBGRNDACTIVE);

    //
    // Return the value of Active register for the Background Task Vector
    //
    return(status);
}

//*****************************************************************************
//
//! Enable the background task
//!
//! \param base is the base address of the CLA controller.
//!
//! This function enables the background task
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_enableBackgroundTask(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Enable background task
    //
    HWREGH(base + CLA_O_MCTLBGRND) |= CLA_MCTLBGRND_BGEN;

    EDIS;
}

//*****************************************************************************
//
//! Disable background task
//!
//! \param base is the base address of the CLA controller.
//!
//! This function disables the background task
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_disableBackgroundTask(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Disables background task
    //
    HWREGH(base + CLA_O_MCTLBGRND) &= ~CLA_MCTLBGRND_BGEN;

    EDIS;
}

//*****************************************************************************
//
//! Start background task
//!
//! \param base is the base address of the CLA controller.
//!
//! This function will start the background task, provided there are no other
//! pending tasks.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_startBackgroundTask(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Start background task
    //
    HWREGH(base + CLA_O_MCTLBGRND) |= CLA_MCTLBGRND_BGSTART;

    EDIS;
}

//*****************************************************************************
//
//! Enable background task hardware trigger
//!
//! \param base is the base address of the CLA controller.
//!
//! This function enables hardware trigger for background task
//! \note Trigger source for the background task will be MPERINT8.1.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_enableHardwareTrigger(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Enable background task hardware trigger
    //
    HWREGH(base + CLA_O_MCTLBGRND) |= CLA_MCTLBGRND_TRIGEN;

    EDIS;
}

//*****************************************************************************
//
//! Disable background task hardware trigger
//!
//! \param base is the base address of the CLA controller.
//!
//! This function disables hardware trigger for background task
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_disableHardwareTrigger(uint32_t base)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    //
    // Disables hardware trigger for background task
    //
    HWREGH(base + CLA_O_MCTLBGRND) &= ~CLA_MCTLBGRND_TRIGEN;

    EDIS;
}

//*****************************************************************************
//
//! Map background task vector
//!
//! \param base is the base address of the CLA controller.
//! \param claTaskAddr is the start address of the code for task
//!
//! This function specifies the start address for the background task
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_mapBackgroundTaskVector(uint32_t base, uint16_t claTaskAddr)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    EALLOW;

    HWREGH(base + CLA_O_MVECTBGRND) = (uint16_t)claTaskAddr;

    EDIS;
}

//*****************************************************************************
//
//! Get Status register for the back ground task.
//!
//! \param base is the base address of the CLA controller.
//! \param stsFlag is status item to be returned.
//!
//! The value of \e stsFlag can be any of the following:
//! - \b CLA_BGSTS_RUNNING
//! - \b CLA_BGSTS_CANNOT_INTERRUPT
//! - \b CLA_BGSTS_OVERFLOW
//!
//! This function gets the status of background task
//!
//! \return Based on the value of \e stsFlag, the function will return:
//! - \b CLA_BGSTS_RUNNING - The function will return \b true if the background
//!   task is running.
//! - \b CLA_BGSTS_CANNOT_INTERRUPT - The function will return \b true if the
//!   background task will not be interrupted (when MSETC BGINTM is executed).
//! - \b CLA_BGSTS_OVERFLOW - This function will return \b true if an enabled
//!   hardware trigger occurred while _MCTLBGRND.BGSTART is set.
//
//*****************************************************************************
static inline bool
CLA_getBackgroundTaskStatus(uint32_t base, CLA_BGTaskStatus stsFlag)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));
    ASSERT((stsFlag == CLA_BGSTS_RUNNING) ||
           (stsFlag == CLA_BGSTS_CANNOT_INTERRUPT) ||
           (stsFlag == CLA_BGSTS_OVERFLOW));

    //
    // Return the background task status value
    //
    return((HWREGH(base + CLA_O_MSTSBGRND) & (uint16_t)stsFlag) != 0U);
}

#endif // #ifdef __TMS320C28XX__

//
// These functions are accessible only from the CLA (Type - 1/2)
//
#if defined(__TMS320C28XX_CLA1__) || defined(__TMS320C28XX_CLA2__)
//*****************************************************************************
//
//! Enable the Software Interrupt for a given CLA Task
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks for which software
//! interrupts are to be enabled, CLA_TASKFLAG_N where N is the task number
//! from 1 to 8, or CLA_TASKFLAG_ALL to enable software interrupts of all tasks
//!
//! This function enables the  Software Interrupt for a single, or set of, CLA
//! task(s). It does this by writing a 1 to the task's bit in the
//! CLA1SOFTINTEN register. By setting a task's SOFTINT bit, you disable its
//! ability to generate an end-of-task interrupt
//! For example, if we enable Task 2's SOFTINT bit, we disable its ability to
//! generate an end-of-task interrupt, but now any running CLA task has the
//! ability to force task 2's interrupt (through the CLA1INTFRC register) to
//! the main CPU. This interrupt will be handled by the End-of-Task 2 interrupt
//! handler even though the interrupt was not caused by Task 2 running to
//! completion. This allows programmers to generate interrupts while a control
//! task is running.
//!
//! \note
//! -# The CLA1SOFTINTEN and CLA1INTFRC are only writable from the CLA.
//! -# Enabling a given task's software interrupt enable bit disables that
//! task's ability to generate an End-of-Task interrupt to the main CPU,
//! however, should another task force its interrupt (through the CLA1INTFRC
//! register), it will be handled by that task's End-of-Task Interrupt Handler.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_enableSoftwareInterrupt(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    __meallow();

    //
    // Enable Software Interrupt
    //
    HWREGH(base + CLA_O_SOFTINTEN) |= taskFlags;

    __medis();
}

//*****************************************************************************
//
//! Disable the Software Interrupt for a given CLA Task
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the tasks for which software
//! interrupts are to be disabled, CLA_TASKFLAG_N where N is the task number
//! from 1 to 8, or CLA_TASKFLAG_ALL to disable software interrupts of all
//! tasks
//!
//! This function disables the  Software Interrupt for a single, or set of, CLA
//! task(s). It does this by writing a 0 to the task's bit in the
//! CLA1SOFTINTEN register.
//!
//! \note
//! -# The CLA1SOFTINTEN and CLA1INTFRC are only writable from the CLA.
//! -# Disabling a given task's software interrupt ability allows that
//! task to generate an End-of-Task interrupt to the main CPU.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_disableSoftwareInterrupt(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    __meallow();

    //
    // Enable Software Interrupt
    //
    HWREGH(base + CLA_O_SOFTINTEN) &=  ~taskFlags;

    __medis();
}
//*****************************************************************************
//
//! Force a particular Task's Software Interrupt
//!
//! \param base is the base address of the CLA controller.
//! \param taskFlags is the bitwise OR of the task's whose software
//! interrupts are to be forced, CLA_TASKFLAG_N where N is the task number
//! from 1 to 8, or CLA_TASKFLAG_ALL to force software interrupts for all tasks
//!
//! This function forces the  Software Interrupt for a single, or set of, CLA
//! task(s). It does this by writing a 1 to the task's bit in the
//! CLA1INTFRC register.
//! For example, if we enable Task 2's SOFTINT bit, we disable its ability to
//! generate an end-of-task interrupt, but now any running CLA task has the
//! ability to force task 2's interrupt (through the CLA1INTFRC register) to
//! the main CPU. This interrupt will be handled by the End-of-Task 2 interrupt
//! handler even though the interrupt was not caused by Task 2 running to
//! completion. This allows programmers to generate interrupts while a control
//! task is running.
//!
//! \note
//! -# The CLA1SOFTINTEN and CLA1INTFRC are only writable from the CLA.
//! -# Enabling a given task's software interrupt enable bit disables that
//! task's ability to generate an End-of-Task interrupt to the main CPU,
//! however, should another task force its interrupt (through the CLA1INTFRC
//! register), it will be handled by that task's End-of-Task Interrupt Handler.
//! -# This function will set the INTFRC bit for a task, but does not check
//! that its SOFTINT bit is set. It falls to the user to ensure that software
//! interrupt for a given task is enabled before it can be forced.
//!
//! \return None.
//
//*****************************************************************************
static inline void
CLA_forceSoftwareInterrupt(uint32_t base, uint16_t taskFlags)
{
    //
    // Check the arguments.
    //
    ASSERT(CLA_isBaseValid(base));

    //
    // Modify protected register
    //
    __meallow();

    //
    // Force Software Interrupt
    //
    HWREGH(base + CLA_O_SOFTINTFRC) |= taskFlags;

    __medis();
}

#endif // #if defined(__TMS320C28XX_CLA1__) || defined(__TMS320C28XX_CLA2__)

//
// These functions can only be called from the C28x
//
#ifdef __TMS320C28XX__

//*****************************************************************************
//
//! Configures CLA task triggers.
//!
//! \param taskNumber is the number of the task CLA_TASK_N where N is a number
//! from 1 to 8.
//! \param trigger is the trigger source to be assigned to the selected task.
//!
//! This function configures the trigger source of a CLA task. The
//! \e taskNumber parameter indicates which task is being configured, and the
//! \e trigger parameter is the interrupt source from a specific peripheral
//! interrupt (or software) that will trigger the task.
//!
//! \return None.
//
//*****************************************************************************
extern void
CLA_setTriggerSource(CLA_TaskNumber taskNumber, CLA_Trigger trigger);

#endif //#ifdef __TMS320C28XX__
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif //  CLA_H