284 lines
7.8 KiB
C
284 lines
7.8 KiB
C
//###########################################################################
|
|
//
|
|
// FILE: Example_2833xAdcToDMA.c
|
|
//
|
|
// TITLE: ADC to DMA Example
|
|
//
|
|
//! \addtogroup f2833x_example_list
|
|
//! <h1> ADC to DMA (adc_dma)</h1>
|
|
//!
|
|
//! This ADC example uses ADC to convert 4 channels for each SOC received,
|
|
//! with total of 10 SOCs.
|
|
//! Each SOC initiates 4 conversions.
|
|
//! DMA is used to capture the data on each SEQ1_INT. DMA will re-sort
|
|
//! the data by channel sequentially, i.e. all channel0 data will be
|
|
//! together and all channel1 data will be together.
|
|
//!
|
|
//! \b Watch \b Variables \n
|
|
//! - DMABuf1 - DMA Buffer
|
|
//
|
|
//###########################################################################
|
|
// $TI Release: $
|
|
// $Release Date: $
|
|
// $Copyright:
|
|
// Copyright (C) 2009-2023 Texas Instruments Incorporated - http://www.ti.com/
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// $
|
|
//###########################################################################
|
|
|
|
//
|
|
// Included Files
|
|
//
|
|
#include "DSP28x_Project.h" // Device Headerfile and Examples Include File
|
|
|
|
//
|
|
// Defines for ADC start parameters
|
|
//
|
|
#if (CPU_FRQ_150MHZ) // Default - 150 MHz SYSCLKOUT
|
|
//
|
|
// HSPCLK = SYSCLKOUT/2*ADC_MODCLK2 = 150/(2*3) = 25.0 MHz
|
|
//
|
|
#define ADC_MODCLK 0x3
|
|
#endif
|
|
#if (CPU_FRQ_100MHZ)
|
|
//
|
|
// HSPCLK = SYSCLKOUT/2*ADC_MODCLK2 = 100/(2*2) = 25.0 MHz
|
|
//
|
|
#define ADC_MODCLK 0x2
|
|
#endif
|
|
|
|
//
|
|
// ADC module clock = HSPCLK/2*ADC_CKPS = 25.0MHz/(1*2) = 12.5MHz
|
|
//
|
|
#define ADC_CKPS 0x1
|
|
|
|
#define ADC_SHCLK 0xf // S/H width in ADC module periods = 16 ADC clocks
|
|
#define AVG 1000 // Average sample limit
|
|
#define ZOFFSET 0x00 // Average Zero offset
|
|
#define BUF_SIZE 40 // Sample buffer size
|
|
|
|
//
|
|
// Globals
|
|
//
|
|
Uint16 j=0;
|
|
|
|
#pragma DATA_SECTION(DMABuf1,"DMARAML4");
|
|
volatile Uint16 DMABuf1[40];
|
|
|
|
volatile Uint16 *DMADest;
|
|
volatile Uint16 *DMASource;
|
|
__interrupt void local_DINTCH1_ISR(void);
|
|
|
|
//
|
|
// Main
|
|
//
|
|
void main(void)
|
|
{
|
|
Uint16 i;
|
|
|
|
//
|
|
// Step 1. Initialize System Control:
|
|
// PLL, WatchDog, enable Peripheral Clocks
|
|
// This example function is found in the DSP2833x_SysCtrl.c file.
|
|
//
|
|
InitSysCtrl();
|
|
|
|
//
|
|
// Specific clock setting for this example
|
|
//
|
|
EALLOW;
|
|
SysCtrlRegs.HISPCP.all = ADC_MODCLK; // HSPCLK = SYSCLKOUT/ADC_MODCLK
|
|
EDIS;
|
|
|
|
//
|
|
// Step 2. Initialize GPIO:
|
|
// This example function is found in the DSP2833x_Gpio.c file and
|
|
// illustrates how to set the GPIO to it's default state.
|
|
//
|
|
// InitGpio(); // Skipped for this example
|
|
|
|
//
|
|
// Step 3. Clear all interrupts and initialize PIE vector table:
|
|
// Disable CPU interrupts
|
|
//
|
|
DINT;
|
|
|
|
//
|
|
// Initialize the PIE control registers to their default state.
|
|
// The default state is all PIE interrupts disabled and flags
|
|
// are cleared.
|
|
// This function is found in the DSP2833x_PieCtrl.c file.
|
|
//
|
|
InitPieCtrl();
|
|
|
|
//
|
|
// Disable CPU interrupts and clear all CPU interrupt flags:
|
|
//
|
|
IER = 0x0000;
|
|
IFR = 0x0000;
|
|
|
|
//
|
|
// Initialize the PIE vector table with pointers to the shell Interrupt
|
|
// Service Routines (ISR).
|
|
// This will populate the entire table, even if the interrupt
|
|
// is not used in this example. This is useful for debug purposes.
|
|
// The shell ISR routines are found in DSP2833x_DefaultIsr.c.
|
|
// This function is found in DSP2833x_PieVect.c.
|
|
//
|
|
InitPieVectTable();
|
|
|
|
//
|
|
// Interrupts that are used in this example are re-mapped to
|
|
// ISR functions found within this file.
|
|
//
|
|
EALLOW; // Allow access to EALLOW protected registers
|
|
PieVectTable.DINTCH1= &local_DINTCH1_ISR;
|
|
EDIS; // Disable access to EALLOW protected registers
|
|
|
|
IER = M_INT7 ; //Enable INT7 (7.1 DMA Ch1)
|
|
EnableInterrupts();
|
|
|
|
//
|
|
// Step 4. Initialize all the Device Peripherals:
|
|
// This function is found in DSP2833x_InitPeripherals.c
|
|
//
|
|
// InitPeripherals(); // Not required for this example
|
|
InitAdc(); // For this example, init the ADC
|
|
|
|
//
|
|
// Specific ADC setup for this example:
|
|
//
|
|
AdcRegs.ADCTRL1.bit.ACQ_PS = ADC_SHCLK;
|
|
AdcRegs.ADCTRL3.bit.ADCCLKPS = ADC_CKPS;
|
|
AdcRegs.ADCTRL1.bit.SEQ_CASC = 0; // 0 Non-Cascaded Mode
|
|
AdcRegs.ADCTRL2.bit.INT_ENA_SEQ1 = 0x1;
|
|
AdcRegs.ADCTRL2.bit.RST_SEQ1 = 0x1;
|
|
AdcRegs.ADCCHSELSEQ1.bit.CONV00 = 0x0;
|
|
AdcRegs.ADCCHSELSEQ1.bit.CONV01 = 0x1;
|
|
AdcRegs.ADCCHSELSEQ1.bit.CONV02 = 0x2;
|
|
AdcRegs.ADCCHSELSEQ1.bit.CONV03 = 0x3;
|
|
AdcRegs.ADCCHSELSEQ2.bit.CONV04 = 0x0;
|
|
AdcRegs.ADCCHSELSEQ2.bit.CONV05 = 0x1;
|
|
AdcRegs.ADCCHSELSEQ2.bit.CONV06 = 0x2;
|
|
AdcRegs.ADCCHSELSEQ2.bit.CONV07 = 0x3;
|
|
|
|
//
|
|
// Set up ADC to perform 4 conversions for every SOC
|
|
//
|
|
AdcRegs.ADCMAXCONV.bit.MAX_CONV1 = 3;
|
|
|
|
//
|
|
// Step 5. User specific code, enable interrupts:
|
|
//
|
|
|
|
//
|
|
// Initialize DMA
|
|
//
|
|
DMAInitialize();
|
|
|
|
//
|
|
// Clear Table
|
|
//
|
|
for (i=0; i<BUF_SIZE; i++)
|
|
{
|
|
DMABuf1[i] = 0;
|
|
}
|
|
|
|
//
|
|
// Configure DMA Channel
|
|
//
|
|
|
|
//
|
|
// Point DMA destination to the beginning of the array
|
|
//
|
|
DMADest = &DMABuf1[0];
|
|
|
|
//
|
|
// Point DMA source to ADC result register base
|
|
//
|
|
DMASource = &AdcMirror.ADCRESULT0;
|
|
|
|
DMACH1AddrConfig(DMADest,DMASource);
|
|
DMACH1BurstConfig(3,1,10);
|
|
DMACH1TransferConfig(9,1,0);
|
|
DMACH1WrapConfig(1,0,0,1);
|
|
DMACH1ModeConfig(DMA_SEQ1INT,PERINT_ENABLE,ONESHOT_DISABLE,CONT_DISABLE,
|
|
SYNC_DISABLE,SYNC_SRC,OVRFLOW_DISABLE,SIXTEEN_BIT,
|
|
CHINT_END,CHINT_ENABLE);
|
|
|
|
StartDMACH1();
|
|
|
|
//
|
|
// Start SEQ1
|
|
//
|
|
AdcRegs.ADCTRL2.bit.SOC_SEQ1 = 0x1;
|
|
|
|
//
|
|
// For this example will re-start manually
|
|
//
|
|
for(i=0;i<10;i++)
|
|
{
|
|
for(j=0;j<1000;j++)
|
|
{
|
|
|
|
}
|
|
|
|
//
|
|
// Normally ADC will be tied to ePWM, or timed routine
|
|
//
|
|
AdcRegs.ADCTRL2.bit.SOC_SEQ1 = 1;
|
|
}
|
|
}
|
|
|
|
//
|
|
// local_DINTCH1_ISR - INT7.1(DMA Channel 1)
|
|
//
|
|
__interrupt void
|
|
local_DINTCH1_ISR(void)
|
|
{
|
|
//
|
|
// To receive more interrupts from this PIE group, acknowledge this
|
|
// interrupt
|
|
//
|
|
PieCtrlRegs.PIEACK.all = PIEACK_GROUP7;
|
|
|
|
//
|
|
// Next two lines for debug only to halt the processor here
|
|
// Remove after inserting ISR Code
|
|
//
|
|
__asm (" ESTOP0");
|
|
for(;;);
|
|
}
|
|
|
|
//
|
|
// End of File
|
|
//
|
|
|