/* * Copyright (C) 2023 Texas Instruments Incorporated * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include "ti_drivers_config.h" #include "ti_drivers_open_close.h" #include "ti_board_open_close.h" #include #include #include #include #include "tisdfm_pruss_intc_mapping.h" /* INTC configuration */ #include "current_sense/sdfm/firmware/sdfm_bin.h" /* SDFM image data */ #include "sdfm.h" #include "current_sense/sdfm/include/sdfm_api.h" /* PRU SDFM FW image info */ typedef struct PRUSDFM_PruFwImageInfo_s { const uint32_t *pPruImemImg; const uint32_t pruImemImgSz; } PRUSDFM_PruFwImageInfo; /* Number of PRU images */ #define PRU_SDFM_NUM_PRU_IMAGE ( 3 ) /* PRU SDFM image info */ static PRUSDFM_PruFwImageInfo gPruFwImageInfo[PRU_SDFM_NUM_PRU_IMAGE] = { {pru_SDFM_PRU0_image_0, sizeof(pru_SDFM_PRU0_image_0)}, /* PRU FW */ {NULL, 0} }; /* ICSS INTC configuration */ static const PRUICSS_IntcInitData gPruicssIntcInitdata = PRUICSS_INTC_INITDATA; /* * ======== initIcss ======== */ /* Initialize ICSSG */ int32_t initIcss( uint8_t icssInstId, uint8_t sliceId, uint8_t saMuxMode, PRUICSS_Handle *pPruIcssHandle ) { PRUICSS_Handle pruIcssHandle; int32_t size; int32_t status; /* Open ICSS PRU instance */ pruIcssHandle = PRUICSS_open(icssInstId); if (pruIcssHandle == NULL) { return SDFM_ERR_INIT_ICSSG; } /* Disable slice PRU cores */ if (sliceId == ICSSG_SLICE_ID_0) { status = PRUICSS_disableCore(pruIcssHandle, PRUICSS_PRU0); if (status != SystemP_SUCCESS) { return SDFM_ERR_INIT_ICSSG; } } else if (sliceId == ICSSG_SLICE_ID_1) { status = PRUICSS_disableCore(pruIcssHandle, PRUICSS_PRU1); if (status != SystemP_SUCCESS) { return SDFM_ERR_INIT_ICSSG; } } else { return SDFM_ERR_INIT_ICSSG; } /* Reset slice memories */ size = PRUICSS_initMemory(pruIcssHandle, PRUICSS_IRAM_PRU(sliceId)); if (size == 0) { return SDFM_ERR_INIT_ICSSG; } size = PRUICSS_initMemory(pruIcssHandle, PRUICSS_DATARAM(sliceId)); if (size == 0) { return SDFM_ERR_INIT_ICSSG; } /* Set ICSS pin mux */ PRUICSS_setSaMuxMode(pruIcssHandle, saMuxMode); /* Initialize ICSS INTC */ status = PRUICSS_intcInit(pruIcssHandle, &gPruicssIntcInitdata); if (status != SystemP_SUCCESS) { return SDFM_ERR_INIT_ICSSG; } *pPruIcssHandle = pruIcssHandle; return SDFM_ERR_NERR; } void sdfm_configure_gpio_pin(sdfm_handle h_sdfm) { /*ch0 GPIO configuration*/ uint32_t gpioBaseAddrCh0Hi = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_HIGH_TH_CH0_BASE_ADDR); uint32_t pinNumCh0Hi = GPIO_HIGH_TH_CH0_PIN; GPIO_setDirMode(gpioBaseAddrCh0Hi, pinNumCh0Hi, GPIO_HIGH_TH_CH0_DIR); SDFM_configComparatorGpioPins(h_sdfm, 0, gpioBaseAddrCh0Hi, pinNumCh0Hi, 0); uint32_t gpioBaseAddrCh0Lo = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_LOW_TH_CH0_BASE_ADDR); uint32_t pinNumCh0Lo = GPIO_LOW_TH_CH0_PIN; GPIO_setDirMode(gpioBaseAddrCh0Lo, pinNumCh0Lo, GPIO_LOW_TH_CH0_DIR); SDFM_configComparatorGpioPins(h_sdfm, 0, gpioBaseAddrCh0Lo, pinNumCh0Lo, 1); /*ch1 GPIO configuration*/ uint32_t gpioBaseAddrCh1Hi = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_HIGH_TH_CH1_BASE_ADDR); uint32_t pinNumCh1Hi = GPIO_HIGH_TH_CH1_PIN; GPIO_setDirMode(gpioBaseAddrCh1Hi, pinNumCh1Hi, GPIO_HIGH_TH_CH1_DIR); SDFM_configComparatorGpioPins(h_sdfm, 1, gpioBaseAddrCh1Hi, pinNumCh1Hi, 0); uint32_t gpioBaseAddrCh1Lo = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_LOW_TH_CH1_BASE_ADDR); uint32_t pinNumCh1Lo = GPIO_LOW_TH_CH1_PIN; GPIO_setDirMode(gpioBaseAddrCh1Lo, pinNumCh1Lo, GPIO_LOW_TH_CH1_DIR); SDFM_configComparatorGpioPins(h_sdfm, 1, gpioBaseAddrCh1Lo, pinNumCh1Lo, 1); /*ch2 GPIO configuration*/ uint32_t gpioBaseAddrCh2Hi = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_HIGH_TH_CH2_BASE_ADDR); uint32_t pinNumCh2Hi = GPIO_HIGH_TH_CH2_PIN; GPIO_setDirMode(gpioBaseAddrCh2Hi, pinNumCh2Hi, GPIO_HIGH_TH_CH2_DIR); SDFM_configComparatorGpioPins(h_sdfm, 2, gpioBaseAddrCh2Hi, pinNumCh2Hi, 0); uint32_t gpioBaseAddrCh2Lo = (uint32_t) AddrTranslateP_getLocalAddr(GPIO_LOW_TH_CH2_BASE_ADDR); uint32_t pinNumCh2Lo = GPIO_LOW_TH_CH2_PIN; GPIO_setDirMode(gpioBaseAddrCh2Lo, pinNumCh2Lo, GPIO_LOW_TH_CH2_DIR); SDFM_configComparatorGpioPins(h_sdfm, 2, gpioBaseAddrCh2Lo, pinNumCh2Lo, 1); } /* Initialize SDFM PRU FW */ int32_t init_sdfm_pru_fw(uint8_t pruId, SdfmPrms *pSdfmPrms, sdfm_handle *pHSdfm, void *pruss_cfg) { sdfm_handle hSdfm; /* Initialize SDFM instance */ hSdfm = SDFM_init(pruId); uint32_t i; i = SDFM_getFirmwareVersion(hSdfm); DebugP_log("\n\n\n"); DebugP_log("SDFM firmware version \t: %x.%x.%x (%s)\n\n", (i >> 24) & 0x7F, (i >> 16) & 0xFF, i & 0xFFFF, i & (1 << 31) ? "internal" : "release"); if (hSdfm == NULL) { return SDFM_ERR_INIT_SDFM; } uint8_t SDFM_CH; hSdfm->iep_clock = pSdfmPrms->iep_clock; hSdfm->sdfm_clock = pSdfmPrms->sd_clock; hSdfm->sampleOutputInterface = (SDFM_SampleOutInterface *)(pSdfmPrms->samplesBaseAddress); uint32_t sampleOutputInterfaceGlobalAddr = CPU0_BTCM_SOCVIEW(pSdfmPrms->samplesBaseAddress); hSdfm->p_sdfm_interface->sampleBufferBaseAdd = sampleOutputInterfaceGlobalAddr; hSdfm->iep_inc = 1; /* Default IEP increment 1 */ hSdfm->pruss_cfg = pruss_cfg; uint8_t acc_filter = 0; //SINC3 filter uint8_t ecap_divider = 0x0F; //IEP at 300MHz: SD clock = 300/15=20Mhz /*configure IEP count for one epwm period*/ SDFM_configIepCount(hSdfm, pSdfmPrms->epwm_out_freq); /*configure ecap as PWM code for generate 20 MHz sdfm clock*/ SDFM_configEcap(hSdfm, ecap_divider); /*set Noraml current OSR */ SDFM_setFilterOverSamplingRatio(hSdfm, pSdfmPrms->FilterOsr); /*below configuration for all three channel*/ for(SDFM_CH = 0; SDFM_CH < NUM_CH_SUPPORTED; SDFM_CH++) { SDFM_setEnableChannel(hSdfm, SDFM_CH); /*set comparator osr or Over current osr*/ SDFM_setCompFilterOverSamplingRatio(hSdfm, SDFM_CH, pSdfmPrms->ComFilterOsr); /*set ACC source or filter type*/ SDFM_configDataFilter(hSdfm, SDFM_CH, acc_filter); /*set clock inversion & clock source for all three channel*/ SDFM_selectClockSource(hSdfm, SDFM_CH, pSdfmPrms->clkPrms[SDFM_CH]); /*set threshold values */ SDFM_setCompFilterThresholds(hSdfm, SDFM_CH, pSdfmPrms->threshold_parms[SDFM_CH]); if(pSdfmPrms->en_fd) { /*Fast detect configuration */ SDFM_configFastDetect(hSdfm, SDFM_CH, pSdfmPrms->fastDetect[SDFM_CH]); } if(pSdfmPrms->en_com) { SDFM_enableComparator(hSdfm, SDFM_CH); } else { SDFM_disableComparator(hSdfm, SDFM_CH); } } /*GPIO pin configuration for threshold measurment*/ sdfm_configure_gpio_pin(hSdfm); SDFM_setSampleTriggerTime(hSdfm, pSdfmPrms->firstSampTrigTime); if(pSdfmPrms->en_second_update) { SDFM_enableDoubleSampling(hSdfm, pSdfmPrms->secondSampTrigTime); } else { SDFM_disableDoubleSampling(hSdfm); } /* Enable (global) SDFM */ SDFM_enable(hSdfm); *pHSdfm = hSdfm; return SDFM_ERR_NERR; } /* * ======== initPruSdfm ======== */ /* Initialize PRU core for SDFM */ int32_t initPruSdfm( PRUICSS_Handle pruIcssHandle, uint8_t pruInstId, SdfmPrms *pSdfmPrms, sdfm_handle *pHSdfm ) { uint8_t sliceId; uint32_t pruIMem; PRUSDFM_PruFwImageInfo *pPruFwImageInfo; int32_t size; const uint32_t *sourceMem; /* Source memory[ Array of uint32_t ] */ uint32_t imemOffset; /* Offset at which write will happen */ uint32_t byteLen; /* Total number of bytes to be written */ uint8_t pruId; int32_t status; void *pruss_cfg; pruss_cfg = (void *)(((PRUICSS_HwAttrs *)(pruIcssHandle->hwAttrs))->cfgRegBase); /* Reset PRU */ status = PRUICSS_resetCore(pruIcssHandle, pruInstId); if (status != SystemP_SUCCESS) { return SDFM_ERR_INIT_PRU_SDFM; } /* Calculate slice ID */ sliceId = pruInstId - (uint8_t)pruInstId/ICSSG_NUM_SLICE * ICSSG_NUM_SLICE; /* Determine PRU DMEM address */ /* Determine PRU FW image and PRU IMEM address */ switch (pruInstId) { case PRUICSS_PRU0: case PRUICSS_PRU1: pPruFwImageInfo = &gPruFwImageInfo[0]; pruIMem = PRUICSS_IRAM_PRU(sliceId); break; case PRUICSS_RTU_PRU0: case PRUICSS_RTU_PRU1: pPruFwImageInfo = &gPruFwImageInfo[1]; pruIMem = PRUICSS_IRAM_RTU_PRU(sliceId); break; case PRUICSS_TX_PRU0: case PRUICSS_TX_PRU1: pPruFwImageInfo = NULL; break; default: pPruFwImageInfo = NULL; break; } if ((pPruFwImageInfo == NULL) || (pPruFwImageInfo->pPruImemImg == NULL)) { return SDFM_ERR_INIT_PRU_SDFM; } /* Write IMEM */ imemOffset = 0; sourceMem = (uint32_t *)pPruFwImageInfo->pPruImemImg; byteLen = pPruFwImageInfo->pruImemImgSz; size = PRUICSS_writeMemory(pruIcssHandle, pruIMem, imemOffset, sourceMem, byteLen); if (size == 0) { return SDFM_ERR_INIT_PRU_SDFM; } /* Enable PRU */ status = PRUICSS_enableCore(pruIcssHandle, pruInstId); if (status != SystemP_SUCCESS) { return SDFM_ERR_INIT_PRU_SDFM; } /* Translate PRU ID to SDFM API */ if (pruInstId == PRUICSS_PRU0) { pruId = PRU_ID_0; } else if (pruInstId == PRUICSS_PRU1) { pruId = PRU_ID_1; } else { return SDFM_ERR_INIT_PRU_SDFM; } /* Initialize SDFM PRU FW */ status = init_sdfm_pru_fw(pruId, pSdfmPrms, pHSdfm, pruss_cfg); if (status != SDFM_ERR_NERR) { return SDFM_ERR_INIT_PRU_SDFM; } return SDFM_ERR_NERR; }