diff --git a/examples/tidep_01032_dual_motor_drive/single_chip_servo/.project/mcsdk_project_am243x.js b/examples/tidep_01032_dual_motor_drive/single_chip_servo/.project/mcsdk_project_am243x.js index ce10846..7e278ba 100644 --- a/examples/tidep_01032_dual_motor_drive/single_chip_servo/.project/mcsdk_project_am243x.js +++ b/examples/tidep_01032_dual_motor_drive/single_chip_servo/.project/mcsdk_project_am243x.js @@ -41,7 +41,7 @@ const files_r5f_1_0 = { "ind_comms_sdk/examples/industrial_comms/custom_phy/src/CUST_PHY_dp83869.c", "ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/ecSlvCiA402.c", "ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/ESL_cia402Obd.c", - "ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/EtherCAT_Slave_CiA402.c", + "EtherCAT_Slave_CiA402.c", "ESL_cia402Demo.c", "ESL_BOARD_OS_config.c", ], @@ -224,8 +224,8 @@ const libs_r5f_1_0 = { "freertos.am243x.r5f.ti-arm-clang.${ConfigName}.lib", "drivers.am243x.r5f.ti-arm-clang.${ConfigName}.lib", "board.am243x.r5f.ti-arm-clang.${ConfigName}.lib", - "ethercat_slave.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib", - "ethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib", + "ethercat_slave.am243x_lp.r5f.ti-arm-clang.release.lib", + "ethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.release.lib", ], }; diff --git a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/EtherCAT_Slave_CiA402.c b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/EtherCAT_Slave_CiA402.c new file mode 100644 index 0000000..87a1052 --- /dev/null +++ b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/EtherCAT_Slave_CiA402.c @@ -0,0 +1,576 @@ +/*! + * \example EtherCAT_Slave_CiA402.c + * + * \brief + * EtherCAT® Slave Example Application with CiA402 Profile. + * + * \author + * KUNBUS GmbH + * + * \copyright + * Copyright (c) 2021, KUNBUS GmbH

+ * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright (c) 2023 KUNBUS GmbH. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + *
    + *
  1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer./
  2. + *
  3. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution.
    4. + *
  4. Neither the name of the copyright holder nor the names of its contributors + * may be used to endorse or promote products derived from this software without + * specific prior written permission.
    5. + *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY + * WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + */ + +#define TIESC_HW 0 +#define PRU_200MHZ 1 + +#include +#include +#include +#include "ti_dpl_config.h" +#include "ti_drivers_config.h" + +/* this one shall the only one to be using it ! */ +#include "project.h" +#include "ecSlvCiA402.h" + +#if (defined FBTL_REMOTE) && (FBTL_REMOTE==1) +#if (defined FBTLIMPL_LINEUART) && (1==FBTLIMPL_LINEUART) + #include "sysLib_lineUart.h" +#else + #include +#endif +#endif + +/* OS */ +#include + +/* ESL */ +#include +#include +#include +#include +#include + +/* stack */ +#include + +/* @cppcheck_justify{misra-c2012-8.9} prefer module global over threadsafety */ +/* cppcheck-suppress misra-c2012-8.9 */ +static OSAL_PJumpBuf_t farJumpBuf_cia; + +static uint32_t EC_SLV_APP_CIA_remoteInit(EC_SLV_APP_CIA_Application_t *applicationInstance); + + +/* For the tidep_01032_dual_motor_drive reference design, ICSSG0 core clock should be configured + * to 300 MHz and ICSSG1 core clock should be configured to 200 MHz. R5F_0_0 configures ICSSG0 first + * and then R5F_1_0 configures ICSSG1. Because of MCUSDK-12117 bug, ICSSG1 clock configuration to + * 200 MHz causes ICSSG0 also to run at 200 MHz which is a problem for EnDat and SDFM firmwares. + * To avoid this issue, the clock configuration of ICSSG1 should be done separately and not from + * SysConfig generated API. Therefore ESL_OS_init()->System_init() is not called here. Instead + * System_init_modified() is defined and called here, which uses a different API call for + * initializing ICSSG1 clock when compared to System_init(). + * + * System_init_modified() function is same as System_init() except PowerClock_init() API call. + * If SysConfig is being updated which leads to changes in the generated code for System_init(), + * please update System_init_modified() function as well. + */ +void System_init_modified(void); +void PowerClock_init_modified(void); +void Module_clockSetFrequency_modified(void); + +extern void Drivers_uartInit(void); +extern void Pinmux_init(void); +extern void GPIO_init(); +extern void Module_clockEnable(void); + +typedef struct { + + uint32_t moduleId; + uint32_t clkId; + uint32_t clkRate; + +} SOC_ModuleClockFrequency; + +extern SOC_ModuleClockFrequency gSocModulesClockFrequency[]; + +#define SOC_MODULES_END (0xFFFFFFFFu) + +void Module_clockSetFrequency_modified(void) +{ + int32_t status; + uint32_t i = 0; + uint32_t icssg0ClkParent, icssg1ClkParent; + + while(gSocModulesClockFrequency[i].moduleId!=SOC_MODULES_END) + { + /*For ICSSG1, call a different API*/ + + if((gSocModulesClockFrequency[i].moduleId == TISCI_DEV_PRU_ICSSG1) && + (gSocModulesClockFrequency[i].clkId == TISCI_DEV_PRU_ICSSG1_CORE_CLK)) + { + + status = Sciclient_pmGetModuleClkParent(TISCI_DEV_PRU_ICSSG0, + TISCI_DEV_PRU_ICSSG0_CORE_CLK, + &icssg0ClkParent, + SystemP_WAIT_FOREVER); + DebugP_assertNoLog(status == SystemP_SUCCESS); + + /*Use a different parent clock for ICSSG1*/ + icssg1ClkParent = icssg0ClkParent + 1; + + status = SOC_moduleSetClockFrequencyWithParent( + gSocModulesClockFrequency[i].moduleId, + gSocModulesClockFrequency[i].clkId, + icssg1ClkParent, + gSocModulesClockFrequency[i].clkRate + ); + } + if((gSocModulesClockFrequency[i].moduleId == TISCI_DEV_PRU_ICSSG1) && + (gSocModulesClockFrequency[i].clkId == TISCI_DEV_PRU_ICSSG1_IEP_CLK)) + { + + status = Sciclient_pmGetModuleClkParent(TISCI_DEV_PRU_ICSSG0, + TISCI_DEV_PRU_ICSSG0_IEP_CLK, + &icssg0ClkParent, + SystemP_WAIT_FOREVER); + DebugP_assertNoLog(status == SystemP_SUCCESS); + + /*Use a different parent clock for ICSSG1*/ + icssg1ClkParent = icssg0ClkParent + 1; + + status = SOC_moduleSetClockFrequencyWithParent( + gSocModulesClockFrequency[i].moduleId, + gSocModulesClockFrequency[i].clkId, + icssg1ClkParent, + gSocModulesClockFrequency[i].clkRate + ); + } + else + { + status = SOC_moduleSetClockFrequency( + gSocModulesClockFrequency[i].moduleId, + gSocModulesClockFrequency[i].clkId, + gSocModulesClockFrequency[i].clkRate + ); + } + DebugP_assertNoLog(status == SystemP_SUCCESS); + i++; + } +} + +void PowerClock_init_modified(void) +{ + Module_clockEnable(); + Module_clockSetFrequency_modified(); +} + +void System_init_modified(void) +{ + + /* This function is same as System_init() except PowerClock_init() API call. + * If SysConfig is being updated which leads to changes in the generated + * code for System_init(), please update this function as well.*/ + + /* DPL init sets up address transalation unit, on some CPUs this is needed + * to access SCICLIENT services, hence this needs to happen first + */ + Dpl_init(); + /* We should do sciclient init before we enable power and clock to the peripherals */ + /* SCICLIENT init */ + { + int32_t retVal = SystemP_SUCCESS; + + retVal = Sciclient_init(CSL_CORE_ID_R5FSS1_0); + DebugP_assertNoLog(SystemP_SUCCESS == retVal); + } + + + /* initialize PMU */ + CycleCounterP_init(SOC_getSelfCpuClk()); + + + PowerClock_init_modified(); + /* Now we can do pinmux */ + Pinmux_init(); + /* finally we initialize all peripheral drivers */ + OSPI_init(); + GPIO_init(); + PRUICSS_init(); + /* PRU IEP Enable SYNC MODE */ + CSL_REG32_WR(CSL_PRU_ICSSG1_PR1_CFG_SLV_BASE + CSL_ICSSCFG_IEPCLK, 1); + + Drivers_uartInit(); +} + +/*! + * + * + * \brief + * Application Loop Task + * + * + * + * \param[in] pArg_p Task Parm. + * + * + * + * \par Example + * \code{.c} + * + * // required variables + * void* pvVariable = NULL; + * + * // the Call + * EC_SLV_APP_CIA_loopTask(pvVariable); + * \endcode + * + * + * + * \ingroup EC_SLV_APP + * + * */ +static void EC_SLV_APP_CIA_loopTask(void *pArg_p) +{ + /* @cppcheck_justify{misra-c2012-11.5} generic API requires cast */ + /* cppcheck-suppress misra-c2012-11.5 */ + EC_SLV_APP_CIA_Application_t *pApplicationInstance = (EC_SLV_APP_CIA_Application_t*)pArg_p; + uint32_t error = EC_API_eERR_NONE; + char *pProductName = NULL; + uint32_t vendorId = 0; + uint32_t productCode = 0; + EC_API_SLV_EEsmState_t state = EC_API_SLV_eESM_uninit; + uint16_t alErrorCode = 0; + + if (!pApplicationInstance) + { + /* @cppcheck_justify{misra-c2012-15.1} goto is used to assure single point of exit */ + /* cppcheck-suppress misra-c2012-15.1 */ + goto Exit; + } + + EC_SLV_APP_CIA_initBoardFunctions(pApplicationInstance); + EC_SLV_APP_CIA_registerStacklessBoardFunctions(pApplicationInstance); + + error = EC_API_SLV_stackInit(); // EtherCAT stack init + if (error != EC_API_eERR_NONE) + { + OSAL_printf("%s:%d Error code: 0x%08x\r\n", __func__, __LINE__, error); + OSAL_error(__func__, __LINE__, OSAL_STACK_INIT_ERROR, true, 0); + } + + EC_SLV_APP_cia402_initAxisObjects(pApplicationInstance); + + EC_SLV_APP_CIA_applicationInit(pApplicationInstance); + + EC_API_SLV_getVendorId(pApplicationInstance->ptEcSlvApi, &vendorId); + EC_API_SLV_getProductCode(pApplicationInstance->ptEcSlvApi, &productCode); + error = EC_API_SLV_getProductName(pApplicationInstance->ptEcSlvApi, &pProductName); + OSAL_printf("%s - %xh / %xh\r\n", pProductName, vendorId, productCode); + + /* spit out versions */ + ESL_dumpVersions(pApplicationInstance->ptEcSlvApi); + + error = EC_SLV_APP_CiA_fetchAxisObjects(pApplicationInstance); + if (error != EC_API_eERR_NONE) + { + OSAL_printf("%s:%d Error code: 0x%08x\r\n", __func__, __LINE__, error); + OSAL_error(__func__, __LINE__, OSAL_STACK_INIT_ERROR, true, 0); + } + + for(;;) + { +#if (defined GPIO_TEST_PINS) && (1==GPIO_TEST_PINS) +#if (defined GPIO_TEST_PROFILE_SEL) && (defined GPIO_TEST_PROFILE_1) && (GPIO_TEST_PROFILE_1 == GPIO_TEST_PROFILE_SEL) + ESL_GPIO_testPins_set(ESL_TESTPIN_STATE_REG_BANK, ESL_TESTPIN_0_MASK/*|ESL_TESTPIN_1_MASK*/); +#endif +#endif + + EC_API_SLV_mainLoopCyclic(); + +#if (defined GPIO_TEST_PINS) && (1==GPIO_TEST_PINS) +#if (defined GPIO_TEST_PROFILE_SEL) && (defined GPIO_TEST_PROFILE_1) && (GPIO_TEST_PROFILE_1 == GPIO_TEST_PROFILE_SEL) + ESL_GPIO_testPins_clear(ESL_TESTPIN_STATE_REG_BANK, ESL_TESTPIN_0_MASK); +#endif +#endif + + EC_API_SLV_getState(pApplicationInstance->ptEcSlvApi, &state, &alErrorCode); + if (EC_API_SLV_eESM_init < state) + { + OSAL_SCHED_yield(); + } + else + { + /* for carve up give some air */ + OSAL_SCHED_sleep(10); + } + } + // not reachable + //EC_SLV_APP_applicationDeInit(); +Exit: + ESL_OS_taskLeave(); + + return; +} + +static void EC_SLV_APP_CIA_mainTask(void *pArg_p) +{ + /* @cppcheck_justify{misra-c2012-11.5} generic API requires cast */ + /* cppcheck-suppress misra-c2012-11.5 */ + EC_SLV_APP_CIA_Application_t *applicationInstance = (EC_SLV_APP_CIA_Application_t*)pArg_p; + uint32_t retVal = OSAL_ERR_NoError; + + if (!applicationInstance) + { + OSAL_error(__func__, __LINE__, OSAL_ERR_InvalidParm, true, 1, "Application instance missing!!!\r\n"); + goto Exit; + } + + retVal = ESL_OS_boardInit(applicationInstance->selectedPruInstance); + if (OSAL_ERR_NoError != retVal) + { + OSAL_error(__func__, __LINE__, retVal, true, 1, "OS Board init error\r\n"); + } + + OSAL_registerPrintOut(NULL, ESL_OS_printf); + + retVal = EC_SLV_APP_CIA_remoteInit(applicationInstance); + + if(!((OSAL_CONTAINER_LOCALIMPLEMENTATION == retVal) || (OSAL_ERR_NoError == retVal))) + { + OSAL_error(__func__, __LINE__, OSAL_ERR_InvalidParm, true, 1, "Fatal error remote API init!!!\r\n"); + /* @cppcheck_justify{misra-c2012-15.1} assure single point of exit */ + /* cppcheck-suppress misra-c2012-15.1 */ + goto Exit; + } + + retVal = EC_API_SLV_load(&farJumpBuf_cia, NULL /* &applErrHandler*/, applicationInstance->selectedPruInstance); + + if (EC_API_eERR_NONE == retVal) + { + EC_API_SLV_prepareTasks(KBECSLV_PRIO_PDI, KBECSLV_PRIO_LED, KBECSLV_PRIO_SYNC0, KBECSLV_PRIO_SYNC1, KBECSLV_PRIO_EOE); + + applicationInstance->loopThreadHandle = OSAL_SCHED_startTask(EC_SLV_APP_CIA_loopTask + ,applicationInstance +#if !(defined FBTL_REMOTE) || (0==FBTL_REMOTE) + ,OSAL_TASK_Prio_Normal +#else + ,OSAL_TASK_Prio_Idle +#endif + ,(uint8_t*)EC_SLV_APP_applLoopTaskStack_g + ,APPLLOOP_TASK_SIZE_BYTE + ,0 + ,"Appl_LoopTask"); + if ( NULL == applicationInstance->loopThreadHandle) + { + OSAL_printf("Error return start Loop Task\r\n"); + OSAL_error(__func__, __LINE__, OSAL_STACK_INIT_ERROR, true, 0); + } + + OSAL_SCHED_joinTask(applicationInstance->loopThreadHandle); + + /* No default tasks (run forever) here, so introduce a wait cycle */ + for (;;) + { + OSAL_SCHED_sleep(1000); + } + } + else + { + for (;;) + { + + for (;;) + { + OSAL_printf("long jmp restart\r\n"); + OSAL_SCHED_sleep(1000); + } + } + } + + // not reachable + + //ESL_OS_boardDeinit(); + //EC_API_SLV_unLoad(); + + //return 0; +Exit: + return; +} + +/*! + * \brief + * Main entry point. + * + * \details + * Simple EtherCAT Slave example demonstrating the configuration the hardware, + * creation of the base slave information as well as the Object Dictionary + * and the Process Data configuration. Furthermore, the FoE Protocol and the + * EEPROM handling are covered on this example. + * + * \param[in] argc Number of command line arguments. + * \param[in] *argv Pointer to an array of command line arguments. + * + * \return uint32_t of type #NAMESPACE_EError_t. + * \retval 0 Success. + * \retval -1 Board initialization failed. + * + */ +int main(int argc, char *argv[]) +{ + /* @cppcheck_justify{threadsafety-threadsafety} no called reentrant */ + /* cppcheck-suppress threadsafety-threadsafety */ + static uint32_t selectedPruInstance = UINT32_MAX; + /* @cppcheck_justify{threadsafety-threadsafety} no called reentrant */ + /* cppcheck-suppress threadsafety-threadsafety */ + static EC_SLV_APP_CIA_Application_t applicationInstance = {0}; + uint32_t error = OSAL_ERR_NoError; + + /* For the tidep_01032_dual_motor_drive reference design, ICSSG0 core clock should be configured + * to 300 MHz and ICSSG1 core clock should be configured to 200 MHz. R5F_0_0 configures ICSSG0 first + * and then R5F_1_0 configures ICSSG1. Because of MCUSDK-12117 bug, ICSSG1 clock configuration to + * 200 MHz causes ICSSG0 also to run at 200 MHz which is a problem for EnDat and SDFM firmwares. + * To avoid this issue, the clock configuration of ICSSG1 should be done separately and not from + * SysConfig generated API. Therefore ESL_OS_init()->System_init() is not called here. Instead + * System_init_modified() is defined and called here, which uses a different API call for + * initializing ICSSG1 clock when compared to System_init(). + * + * System_init_modified() function is same as System_init() except PowerClock_init() API call. + * If SysConfig is being updated which leads to changes in the generated code for System_init(), + * please update System_init_modified() function as well. + */ + + /* ESL_OS_init(); */ + System_init_modified(); + +#if !(defined FBTL_REMOTE) + selectedPruInstance = ESL_DEFAULT_PRUICSS; +#endif + + if (1 < argc) + { + char *inst = argv[1]; + selectedPruInstance = strtoul(inst, NULL, 0); + } + + /* Init osal */ + OSAL_init(); + + applicationInstance.selectedPruInstance = selectedPruInstance; + + TaskP_Params_init(&applicationInstance.mainThreadParam); + + applicationInstance.mainThreadParam.name = "mainThread"; + applicationInstance.mainThreadParam.stackSize = MAIN_TASK_SIZE_BYTE; /* FreeRTOS wants Stacksize in Units, when called direct, using TaskP it's bytes */ + applicationInstance.mainThreadParam.stack = (uint8_t*)EC_SLV_APP_mainTaskStack_g; + applicationInstance.mainThreadParam.priority = (TaskP_PRIORITY_LOWEST+1); + applicationInstance.mainThreadParam.taskMain = (TaskP_FxnMain)EC_SLV_APP_CIA_mainTask; + applicationInstance.mainThreadParam.args = (void*)&applicationInstance; + + error = TaskP_construct(&applicationInstance.mainThreadHandle + ,&applicationInstance.mainThreadParam); + if (SystemP_SUCCESS != error) + { + OSAL_printf("Error setting create thread of %s (%ld)\r\n", applicationInstance.mainThreadParam.name, error); + OSAL_error(__func__, __LINE__, OSAL_STACK_INIT_ERROR, true, 0); + } + + OSAL_startOs(); + + OSAL_error(__func__, __LINE__, OSAL_ERR_InvalidParm, true, 1, "Not reachable by design!!!\r\n"); + + // not reachable + //EC_API_SLV_unLoad(); + + return error; +} + +static uint32_t EC_SLV_APP_CIA_remoteInit(EC_SLV_APP_CIA_Application_t *applicationInstance) +{ + uint32_t retVal = OSAL_CONTAINER_LOCALIMPLEMENTATION; + + if (!applicationInstance) + { + /* @cppcheck_justify{misra-c2012-15.1} goto is used to assure single point of exit */ + /* cppcheck-suppress misra-c2012-15.1 */ + goto Exit; + } + +#if (defined FBTL_REMOTE) && (FBTL_REMOTE==1) +#if (defined FBTLIMPL_LINEUART) && (FBTLIMPL_LINEUART==1) + retVal = SYSLIB_createLibInstanceLine( FBTL_LINE_UART_NAME, + FBTL_MAX_ASYNC_LEN, FBTL_MAX_ASYNC_LEN, + FBTL_MAX_PD_LEN, FBTL_MAX_PD_LEN +#if (defined FBTLTRACECALLS) && (FBTLTRACECALLS==1) + ,true +#else + ,false +#endif + ,&(applicationInstance->remoteHandle) + ); +#else + retVal = SYSLIB_createLibInstanceShm(FBTLSHARED_MEM_NAME, FBTLSHARED_MEM_SIZE, false, + FBTL_MAX_ASYNC_LEN, FBTL_MAX_ASYNC_LEN, FBTL_MAX_PD_LEN, FBTL_MAX_PD_LEN +#if (defined FBTLTRACECALLS) && (FBTLTRACECALLS==1) + ,true +#else + ,false +#endif + ,&(applicationInstance->remoteHandle) + ); +#endif +#else + OSALUNREF_PARM(applicationInstance); + retVal = OSAL_CONTAINER_LOCALIMPLEMENTATION; +#endif + + if(OSAL_CONTAINER_LOCALIMPLEMENTATION == retVal) + { + OSAL_printf("\r\nLocal Implementation\r\n"); + } +#if (defined FBTL_REMOTE) && (FBTL_REMOTE==1) + else if(EC_API_eERR_NONE == retVal) + { + retVal = EC_API_SLV_FBTL_configuration(applicationInstance->remoteHandle); + if(EC_API_eERR_NONE != retVal) + { + OSAL_printf("%s:%d Error code: 0x%08x\r\n", __func__, __LINE__, retVal); + OSAL_error(__func__, __LINE__, OSAL_STACK_INIT_ERROR, true, 0); + /* @cppcheck_justify{misra-c2012-15.1} goto is used to assure single point of exit */ + /* cppcheck-suppress misra-c2012-15.1 */ + goto Exit; + } + } +#endif + else + { + /* nothing to do */ + ; + } + + Exit: + if((OSAL_ERR_NoError != retVal) && (OSAL_CONTAINER_LOCALIMPLEMENTATION != retVal)) + { + OSAL_printf("%s:%d::> err ret = 0x%x\r\n", __func__, __LINE__, retVal); + } + return retVal; +} diff --git a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/example.projectspec b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/example.projectspec index 261a10d..e436315 100644 --- a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/example.projectspec +++ b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/example.projectspec @@ -117,8 +117,8 @@ -lfreertos.am243x.r5f.ti-arm-clang.debug.lib -ldrivers.am243x.r5f.ti-arm-clang.debug.lib -lboard.am243x.r5f.ti-arm-clang.debug.lib - -lethercat_slave.am243x_lp.r5f.ti-arm-clang.debug.lib - -lethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.debug.lib + -lethercat_slave.am243x_lp.r5f.ti-arm-clang.release.lib + -lethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.release.lib -llibc.a -llibsysbm.a " @@ -146,7 +146,7 @@ - + diff --git a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/linker.cmd b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/linker.cmd index 94ab158..bb17c50 100644 --- a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/linker.cmd +++ b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/linker.cmd @@ -128,7 +128,7 @@ MEMORY R5F_TCMA : ORIGIN = 0x00000040 , LENGTH = 0x00007FC0 R5F_TCMB0: ORIGIN = 0x41010000 , LENGTH = 0x00008000 - MSRAM_1_0 : ORIGIN = 0x700C0000 , LENGTH = 0x00070000 + MSRAM_1_0 : ORIGIN = 0x700C0000 , LENGTH = 0x00080000 EXTRAHEAP: ORIGIN = 0x70008000 , LENGTH = 0x00038000 /* shared memories that are used by all cores */ diff --git a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/makefile b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/makefile index 7d3ac70..bc76cd6 100644 --- a/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/makefile +++ b/examples/tidep_01032_dual_motor_drive/single_chip_servo/am243x-lp/r5fss1-0_freertos/ti-arm-clang/makefile @@ -43,7 +43,7 @@ FILES_common := \ ind_comms_sdk/examples/industrial_comms/custom_phy/src/CUST_PHY_dp83869.c \ ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/ecSlvCiA402.c \ ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/ESL_cia402Obd.c \ - ind_comms_sdk/examples/industrial_comms/ethercat_slave_demo/device_profiles/402_cia/EtherCAT_Slave_CiA402.c \ + EtherCAT_Slave_CiA402.c \ ESL_cia402Demo.c \ ESL_BOARD_OS_config.c \ ti_drivers_config.c \ @@ -139,8 +139,8 @@ LIBS_common = \ -lfreertos.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ -ldrivers.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ -lboard.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ - -lethercat_slave.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib \ - -lethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib \ + -lethercat_slave.am243x_lp.r5f.ti-arm-clang.release.lib \ + -lethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.release.lib \ -llibc.a \ -llibsysbm.a \ @@ -158,8 +158,8 @@ LIBS_NAME = \ freertos.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ drivers.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ board.am243x.r5f.ti-arm-clang.${ConfigName}.lib \ - ethercat_slave.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib \ - ethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.${ConfigName}.lib \ + ethercat_slave.am243x_lp.r5f.ti-arm-clang.release.lib \ + ethercat_slave_bkhfSsc.am243x_lp.r5f.ti-arm-clang.release.lib \ libc.a \ libsysbm.a \